| Simple multiswitch SMS-G and SMS-R |

Description
The simple multiswitch is an additional switch to trigger functions, such as driving sounds, additional sounds or lights.The switches can be used with following BEIER-modules:
The simple multiswitch hast two switches, each with three positions. The middle position is always neutral and has no function. With the positions "up" and "down" you can trigger all functions at the BEIER-module. With the first switch you can activate area "A and "D", with the second switch "B" and "C".
Up to eight functions can be controlled with the simple multiswitch. Four functions can be activated by pushing the switch only short and four more by pushing it long.
The switches automatically returns to neutral.
In general, the multiswitch works like a "stick simulation via switches/keys", which is explained in the BEIER-module operating manual.
The simple multiswitch SMS is available in two versions:
| • SMS-G (for Graupner transmitter) with a 5-pole plug |
| • SMS-R (only for Robbe transmitter) with 3-pole plug |
The SMS-G can be used with transmitter of other producer, as well. This requires a free channel to connect a 3-pole plug (plus, signal, minus) at your receiver. You might have to remove or modify the 5-pole plug for that.
The SMS-R contains a resistor in its signal wire, which is necessary and typical for Robbe. Therefore the SMS-R can only be used for Robbe transmitter.
Technical data
| Supply voltage (from transmitter): | 3 - 5 V DC |
| Power consumption: | 1 - 3 mA |
| Number of switches: | 2 |
| Possible positions: | 4 (2 each switch) |
| Gap between switches: | 15 mm |
| Size: | 29 x 12 x 35 mm (with switch) |
Price
Product Safety
Warning:CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of an adult.
Manufacturer / EU Responsible Party:
BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany
modellbau@beier-electronic.de









