| Optocoupler adapter OKA-4 |

Description
Using the optocoupler adapter OKA-4, additional sound and light functions can be triggered via switching outputs at all USM sound modules.The OKA-4 contains 4 separate in- and outputs. As soon as a voltage of 2,0 - 15,0 V is applied at the input, the corresponding output triggers. The polarity of the input voltage thereby must not be respected. Therefore, the OKA-4 can be connected directly to a motor and speed controller to trigger an additional sound, as soon as the engine is running - no matter which direction.
The 4 outputs can be used as the plus- or minus switching outputs, thus the OKA-4 can be used for all USM sound modules.
The inputs and outputs are with solder connections.
You can find connection examples in the user manual (PDF 700 kB).
Technical data
| Channels: | 4 in- and outputs (galvanically isolated) |
| Input voltage: | 2,0 - 15,0 V (higher voltages are possible using series resistors) |
| Input current: | approx. 1 - 14 mA (depending on input voltage) |
| Outputs: | plus- or minus switching |
| Output current: | max. 5 mA |
| Size: | 30 x 22 x 10 mm |
| Weight: | 4 g |
Product Safety
Warning:CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of an adult.
Manufacturer / EU Responsible Party:
BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany
modellbau@beier-electronic.de









