Nautic multiswitch module NMS-16R, NMS-16-G and NMS-24-G

Switch panel optional available
NMS-16-R
for Robbe radio remote control
with 3-pole plug
NMS-16-G
for Graupner radio remote control
with 5-pole plug
NMS-24-G
for Graupner radio remote control
with 5-pole plug
(but not for HoTT!)
NMS-GA
Adapter plug for old Graupner radio remote control
 

The Nautic multiswitch modules at a glance:

  • Extension of RC control with additional 8 or 12 switches
  • Enables to control further 16 or 24 functions
  • Decoding of switches with sound modules SFR-1, USM-RC, USM-RC-2, speed controlers UFR-1230, UFR-1230-D and with multiswitch decoder MSD-16 possible
  • Connection requires free proportional channel
  • Installation inside and outside the radio remote control box possible,
    extra box available
  • Important: not compatible with every radio control system

Description

The nautic multiswitch module NMS is an extension for your RC control, available with 8 and 12 switches.
It is suitable for the sound modules SFR-1, USM-RC and USM-RC-2 in order to activate functions such as sounds and lights.
Up to 16 (8 switches) or 24 function (12 switches) can be triggered.

The NMS is built into the radio control and requires one free proportional channel.
In case there is not enough space inside your radio control you can install the nautic multiswitch modules ouside your radio control, using the boxes for multiswitch modules.

For installation no additional decoder is necessary. You only need to connect the output of your receiver to a proportional channel of the sound module (X2/3 or X2/4)).

With the modules NMS-16-G and NMS-16-R you can also switch the outputs of the multiswitch decoder MSD-16.

The transmission of data is carried out with time division multiplex, which delays the response time of the switches for 0,2-0,3s.

Each switch has three positions: up - middle - down. The middle position is neutral and no functions can be assigned to this position. This means with each switch at the minimum two functions with the positions "up" and "down" can be controlled.

After pressing, the switch automatically returns to neutral and the activation of the switching output stops.
However, with the memory setting (programmable in your Sound-Teacher) you can activate each switching output permanently. This is useful for example for light functions. You can also activate different functions by short or long pressing of the switch.

The NMS is available in three different versions:

NMS-16-R:
The NMS-16-R (8 switches / to trigger 16 additional functions) is suitable for Robbe/Futaba radio remote control.
Size: 66 x 32 mm
Required height in radio: 26 mm

NMS-16-G:
The NMS-16-G (8 switches / to trigger 16 additional functions) is suitable for Graupner radio remote control.
Size: 66 x 47 mm
Required height in radio: 26 mm

NMS-24-G:
The NMS-24-G (12 switches / to trigger 24 additional functions) is suitable for Graupner radio remote control.
Caution: The NMS-24-G is not working with the 2,4GHz system HoTT! For this system you can use the NMS-16-G.
Size: 66 x 47 mm
Required height in radio: 26 mm

For old (older) Graupner radio remote control (e.g. 4014) with a black, 4-pole "teacher/pupil"-plug, you need the adapter plug NMS-GA!

More information can be found in our operating manual (German).

Overview of compatible and not compatible radio remote control or 2,4GHz systems

Due to a special type of data transmission between transmitter and receiver, the NMS is not working with all 2,4GHz systems!

With a FM-transmitter it is necessary to set  "PPM" as transmission type! The NMS is not working with transmission type "PCM".

Transmitter System NMS-Type Compatibility
Graupner 4014 FM (35/40MHz) NMS-16-G
NMS-24-G
Graupner mc-19 FM (35/40MHz) NMS-16-G
NMS-24-G
iFS NMS-16-G
NMS-24-G
HoTT NMS-16-G
Jeti NMS-16-G
NMS-24-G
Corona NMS-16-G
NMS-24-G
 
Graupner mc-22 FM (35/40MHz) NMS-16-G
NMS-24-G
iFS NMS-16-G
NMS-24-G
HoTT NMS-16-G
Jeti NMS-16-G
NMS-24-G
 
Graupner mc-24 FM (35/40MHz) NMS-16-G
NMS-24-G
HoTT NMS-16-G ?
Jeti NMS-16-G
NMS-24-G
 
Graupner mc-32    
Graupner mx-Series    
Graupner mz-Series    
 
Robbe F-14 FM (35/40MHz) NMS-16-R
Jeti NMS-16-R
 
Robbe FC-16 FM (35/40MHz) NMS-16-R
Jeti NMS-16-R
 
In general FM (35/40MHz)  
iFS  
HoTT  
Jeti  
FASST  
FrSky  
Corona  
Servonaut Zwo4 NMS-16-G
NMS-16-G
NMS-24-G

Legend:

Compatible (tested)
? Should be compatible (not tested)
Not compatible


At Jeti, the receiver must necessarily have the option "Output period: By Transmitter"!

Prices (incl. VAT)


Reduction of German VAT from 19 % to 16 % from July until December 2020.

All prices in our online shop include 19 % VAT. Deliveries (B2C) within the EU receive a VAT discount in step 6.

The VAT change does not effect the net prices and thus deliveries outside the EU or B2B customers within the EU.



Nautic multiswitch NMS-16-R
for Robbe transmitter
Please specify in the comment field in step 6, in which transmitter the NMS should to be installed!!
79,95 € In stock

Nautic multiswitch NMS-16-G
for Graupner transmitter
Please specify in the comment field in step 6, in which transmitter the NMS should to be installed!!
79,95 € In stock

Nautic multiswitch NMS-24-G
for Graupner transmitter (but not for HoTT)
Please specify in the comment field in step 6, in which transmitter the NMS should to be installed!!
95,95 € In stock

Plug adapter NMS-GA
necessary for old Graupner transmitter (with black 4-pole plug-connection) !
3,95 € In stock

Switch panel SB-16-R for multiswitch modules NMS-16-R and EMS-16-R 3,95 € In stock

Switch panel SB-16-G for multiswitch modules NMS-16-G and EMS-16-G 3,95 € In stock

Switch panel SB-24-G for multiswitch modules NMS-24-G and EMS-24-G 4,95 € In stock



Included in delivery:
  • Nautic multiswitch module
  • Operating manual (German)

Optional:

To use NMS with sound module USM-RC you need at least Sound-Teacher version V1.30g.

For USM-RC-2 you need at least Sound-Teacher version V1.11a.

You can download the latest version with your Sound Teacher from our homepage.

Customer reviews for this product

16.09.2018
Kurt aus Wien:

Ich habe das NMS 24 G in meine neue Mc 32 eingebaut und es funktioniert tadellos.Was weiss ich das es heisst es geht nicht in Hott oder ist damit das alte Hott gemeint? 16.09.2018 Kurt aus Wien

Kommentar von BEIER-Electronic:
Du hast das EMS-24-G. Das NMS-24-G funktioniert nicht in der MC-32!
07.10.2016
Ralf aus Berlin:

Das NMS-16-G funktioniert auch an einer Graupner MC-24 mit G-2-Modul (2,4 GHz) dank des Support von Beier. Soweit ich mitbekommen habe muß die Übermittlungsgeschwindigkeit etwas herabgesetzt werden, was bei meiner MC-24 durch den Kundenservice geschehen ist. Perfekte Funktion!
01.04.2016
Walter aus Rheine:

Heute bekommen, natürlich gleich in meine MC 19 eingebaut und was soll ich sagen, einfach TOP.

Verträgt sich perfekt mit meinem Graupner 4108.

Danke für die schnelle Lieferung, alles SUPER

17.08.2015
Florian aus Vaterstetten:

Ich verwende das NMS-16-G in Kombination mit einer Graupner MC-24 (HoTT) und dem Soundmodul USM-RC-2.
Nach anfänglichen Schwierigkeiten, konnte ich das Modul mit Hilfe des Supports zum Laufen bringen (An dieser Stelle nochmal vielen Dank an BEIER-Electronic Andy, der mir innerhalb kürzester Zeit die richtigen Hinweise gab).
Nun läuft das Modul und ich bin begeistert was sich damit alles am Soundmodul einstellen lässt. Im Moment kann ich damit alle Funktionen abdecken. Ich bin mir aber sicher, dass igendwann ein zweites Modul eingebaut wird ;-).
Ich bedanke mich für das tolle Produkt und den perfekten Support! Macht weiter so!


To write a new review, please login to your customer account.

Login | Register