All settings are saved on a micro SD card and can be changed at any time. All you need is a PC, an SD card reader or the data cable K-USB-2 and our software USM-RC-3 Sound-Teacher. The program is compatible with all Windows versions. With a free emulator like WineBottler and Wine, however, the software can also be used with other operating systems. For a true-to-original sound of the model, sounds can be selected for the following areas:

Driving and engine sounds for two engines (depending on speed) Additional sounds (e.g. horns, bells, sirens, hydraulic noises etc.) Random sounds (e.g. compressed air noises, animal and ambient noises, etc.)

A loudspeaker with an impedance between 4 and 8 ohms and a power of at least 8 W can be connected to the sound module. For an optimal sound, we recommend using a loudspeaker housing (resonance body). The USM-RC-3 has 16 switching outputs to which LEDs, lamps and relays, for example, can be connected to enable various lighting effects. Light functions such as dipped headlights, reversing lights, brake lights, indicators, hazard warning lights, flickering lights, etc. can be easily implemented and controlled. All light functions can be automatically activated or deactivated to match the sound and movement.

8 time-controlled output sequences can be set for automatically running lighting effects. For each step it can be determined which outputs should be switched on in a certain brightness. Different party lights, all-round lights and running lights or hazard lights can be implemented easily.

An extra high-current output with 3 A is available for connecting particularly strong consumers (with a high current consumption), such as smoke generators.

The sound module also has an extra output for connecting an IR diode for the light module LM-IR-16-4 or a bluetooth module for the light module LM-BT-16-4. In this way, the light and servo signals can be transmitted wirelessly to a semitrailer and trailer.

All light and additional functions of the sound module can be activated via nautic and multiswitch modules and controlled via the smartphone app SFR-1 Controller. With four additional servo outputs, movements such as those of windshield wipers can be easily controlled and adjusted to the sound being played. Speed controllers can also be connected to the servo outputs in order to control additional motors. Like its predecessor, the USM-RC-2 sound module has different operating modes. These become relevant as soon as a standard remote control with a receiver and proportional channels is not used.

However, in 99% of the applications the digital mode (optionally with speed controller UFR-1230) is used, in which the sound module is connected to the receiver via proportional channels. Hereby the module receives the information of speed and direction and plays the correct driving sound and switches automatic functions, such as indicators or a warning light when reversing.

The analog and mixed operation is only used with non-standard RC remote control systems or with speed controllers with special functions, like a cruise control. The driving speed of the model is taken directly from the drive motor(s). Various switches for controlling the functions can be connected to 4 switching inputs.

The connection and programming of all BEIER modules are very similar, therefore the USM-RC-2 tutorials are very helpful to get an overview of how they work.

	Video-Tutorials of USM-RC-2:
Tutorial 01	Installation of the Sound-Teacher, open new projects and save on SD-card
Tutorial 02	Connection of the sound module to battery, receiver and speed controller
Tutorial 03	Different options to activate driving sounds
Tutorial 04	Control different functions of the sound module
Tutorial 05	The diagnostic function of the sound module
Tutorial 06	Controlling functions with nautic/multiswitch modules
Tutorial 07	Different ways to adjust the volume

Tutorial in English

Beier USM-RC-3 Full Install by Bob from Hobbyconcepts

Truck	SOUNDTEST mit Beier USM RC3, Cross Rc DC8 Tatra 813 by Andy
Truck	BC8 Mammoth mit Beier USM-RC3 by Heiko Müller
Excavator	Beier USM-RC3 with real CAT excavator sounds by Aloko TP
Tractor	BRM Fendt 1050 4X4, Beier Soundmodul USM RC 3 by bagys04
Ship	Shrimp cutter: Light and sound test by Getagabo
Ship	Norderney by Mister X Kanal
Panzer	Gepard 1/16 by Ivan
Tank	Jagdtiger 1/16: Torro refined by Panzerschmied