| Switching module RC-SM-2 |

The Switching module RC-SM-2 is no longer available!
Description
The switching module RC-SM-2 has 2 outputs. They can be triggered via one proportional channel of a RC remote control.The RC-SM-2 is connected with a servo patch cable directly to an output of the receiver. It is also possible to connect the switching module parallel (e.g. with a Y-cable) to a servo or speed controller.
The switching module RC-SM-2 is suitable for all USM sound modules. Next to additional sounds, all kind of electrical loads can be switched, such as lamps, LEDs, small motors and relays.
By using PhotoMOS relays, both outputs are floating and by appropriate wiring they can be run as plus- or minus-switching.
The RC-SM-2 was originally developed to trigger additional sounds and therefore it is only suitable for small currents up to 0,4 A. In order to use higher currents (up to 2 A) the special version RC-SM-2H must be used.
With 2 jumpers 4 switching variants are available:
|
Using a trimmer, the switching thresholds / sensitivity can be adjusted to changes of the proportional signal.
The module is supplied with a 30 cm long servo patch cable with a Graupner plug.
Both outputs are designed with solder connections.
More information can be found in the Bedienungsanleitung (PDF 453 kB).
Technical data
| Required RC-proportional channel: | 1 |
| Supply voltage: | 4,8 - 6,0 V (higher than RC-receiver) |
| Current consumption: | ca. 10 - 25 mA |
| Switching outputs: | 2 pieces floating, plus- or minus-switching |
| Switching voltage: | max. 40 V DC |
| Switching current (each output): | max. 0,4 A with RC-SM-2 max. 2,0 A with RC-SM-2H |
| Switching variants: |
• push-button function • switching function (memory) • switching in case of a change of the proportional signal (dependent on direction) • switching in case of a change of the proportional signal (dependent on movement) |
| Switching thresholds: | Adjustable between 1,0-1,5 and 1,5-2,0 ms |
| Size: | 39 x 25 x 13 mm |
| Weight: | 11 g |
Product Safety
Warning:CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of an adult.
Manufacturer / EU Responsible Party:
BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany
modellbau@beier-electronic.de








