| Power amplifier PV-20W |

Description
The amplifier PV-20W is constructed for the sound modules USM-HL and USM-RC. In combination with a suitable loudspeakera much higher volume can be realised using the amplifier.
We recommend this amplifier especially for ships because of a high loss of sound caused by large distances and a lacking sound reflection on lakes.
Connecting the amplifier is quite easy. In comparison to other amplifier, we scaled its signal input to avoid the need of an additional voltage divider in order to connect it to the sound modules. At the same time we improved the noise immunity due to a "high" voltage low frequency connection to the amplifier.
To get an optimal result a loudspeaker with 4 Ohm at the minimum is required!
The higher the loudspeaker impedance the lower the volume.
Caution: The amplifier is not suited for sound module USM-RC-2!
We recommend the loudspeaker LS-4R-25W-90.
More information can be found in our operating manual (German - PDF 145kB).
Technical data
| Supply voltage: | 6 - 15V DC |
| Power consumption: | Standby-current: ca. 60mA Max. power: ca. 2,5A |
| Max. sine power: | 20W |
| Max. music power: | min. 50W |
| Max. input sensitivity: | ca. 2,5Veff / 7Vss |
| input resistance: | ca. 70k Ohm |
| Suitable loudspeaker impedance: | 2-8 Ohm |
| Internal over-temperature protection: | Disconnection at 140�C |
| Size: | 65 x 45 x 27mm |
| Weight: | 60g |
Product Safety
Warning:CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of an adult.
Manufacturer / EU Responsible Party:
BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany
modellbau@beier-electronic.de








