Mini Infrared Light Module LM-IR-8-1
for semitrailer and trailer

The Mini IR light module LM-IR-8-1 at a glance:

  • For controlling lights and a servo output on semi-trailers and trailers
  • Extension for the modules SFR-1, USM-RC-2, USM-RC-3, MSM-1 and UFR-1230
  • Supply voltage between 6 - 12 V
  • 1:1 transmission of light signals via infrared
  • 8 switching outputs for lights
  • 1 servo output
  • Very small design: 39 x 28 x 17 mm

Description

The infrared light module LM-IR-8-1 is an expansion module for the following modules:
The light module can be used to control lights and a servo output on a (truck) trailer and semi-trailer. The signals are transmitted wirelessly via infrared.

Light control
The LM-IR-8-1 has 8 switching outputs for connecting lighting (e.g. lamps and LEDs). The light signals (outputs 1 - 8) are passed on 1:1 from the main module to the light module.

Servo control
There is 1 servo output on the light module, which can be used to control various movements. Applications for this are e.g. trailer supports, the locking and unlocking of a fifth wheel, steerable axles or tilting movements. To control a motor, a speed controller can also be connected to the servo output.

In order to control the LM-IR-8-1, the light module may need to be selected or activated in the main module settings. For the USM-RC-2, USM-RC-3 and SFR-1 modules you can choose between two different IR protocols (slow and fast). The LM-IR-8-1 understands both protocols. With the MSM-1 and UFR-1230 there is only 1 protocol and this is automatically activated.

For additional information: Operating manual (PDF).




Optional light module supplies

Image Name Function


KB-IR-T:
King pin for Tamiya trucks with retaining clip for IR receiver

The IR transmitter diode is mounted underneath the fifth wheel and the IR receiver is fixed on top of the king pin. For an easy mounting we offer a special clip in which the receiver can be clamped.

For the transmission of the infrared signal, the king pin has a hole in the middle.

IR transmitter diode
This can be used to equip other towing vehicles to control the LM-IR-8-1.

One IR transmitter diode is already included in delivery!


Technical data

Supply voltage (Ub): 6 – 12 V DC
Power consumption: Standby current: approx. 15 mA
Switching outputs: 16 pieces, minus switching, the hight of the output voltage corresponds to the supply voltage.
Continuous current: 1,5 A,
Total current of all outputs max.: 3 A
Light functions: 1:1 copy of outputs 1 - 8 of the main module
Servo output: 4 piece
max. power consumption of servo: 1 A,
short time 4 A
Permissible ambient temperature: 0 – 60° C
Permissible relative air humidity: Max. 85 %
Size: 39 x 28 x 17 mm
Weight: 12 g

Prices


All prices incl. 19 % VAT (Shipping to: Deutschland)
Mini Infrared light module LM-IR-8-1
Suited for SFR-1, USM-RC-2, USM-RC-3, MSM-1 and UFR-1230
69,95 € In stock

King pin IR Tamiya KB-IR-T
with retaining clip for IR receiver
9,95 € In stock

Infrared receiver for SM-IR-16, SM-IR-16-2, LM-IR-8-1 and LM-IR-16-4
as replacement
4,95 € In stock

Infrared transmitter diode for SFR-1, USM-RC-2, USM-RC-3, MSM-1 and UFR-1230
as replacement
3,55 € In stock

Ferrite ring for suppression
for motor- and receiver cables
2,20 € In stock


Included in delivery
  • Mini Light module LM-IR-8-1
  • IR transmitter diode (blue)
  • IR receiver (red)
  • 1 x ribbon cable (40 cm) for connection of switching outputs
  • Operating manual (German / English)
Recommended accessory

Product Safety

Warning:
CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of an adult.

Manufacturer / EU Responsible Party:
BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany
modellbau@beier-electronic.de

Customer reviews for this product

09.10.2025
Kimmo aus Naantali:

This would be more than perfect for dolly if you can make IR connection (road train) in this small box..


To write a new review, please login to your customer account.

Login | Register