Terminal clamp for switching outputs AKL-10-W, with plugable resistors |
Description
The AKL-10-W allows a comfortable wiring of the switching outputs for these modules:At the spring-loaded terminal the outputs 1-10 are available for an easy connection of consumers.
The outputs 11 to 16 are interconnected for an easy distribution of the plus pole.
The terminal can be connected directly to the sound and extension module with a pluggable ribbon cable.
The plus pole must be connected separately to each consumer, using clamp terminals 11 to 16.
Included with the AKL-10-W are each 10 resistors with values of 0 ohms (only 1 black ring), 150 ohms (brown, green, brown, gold) 330 Ohm (orange, orange, brown, gold) and 680 Ohm (blue, gray, brown, gold).
More information can be found in the manual (PDF).
Technical Data
Terminal clamp: |
Terminal 1 to 10: Switching outputs from sound or
extension module (minus switching) Terminal 11 to 16: interconnected |
Connecting cable: | 10 pin ribbon cable, 20 cm long, connectable directly to sound module USM-RC-2 and extension module EXM-2 |
Size: | 47 x 35 x 18 mm |
Weight: | 20 g |
Prices
All prices incl. 19 % VAT (Shipping to: Deutschland) | ||||
---|---|---|---|---|
Terminal clamp AKL-10-W with plugable resistors For sound modules USM-HL-2 and USM-RC-2 |
19,95 € |
Included in delivery:
|