Terminal clamp with constant current outputs AKL-10-K

The terminal clamp AKL-10-K is no longer available!

We recommend as replacement the AKL-8-W or AKL-10-W.


The AKL-10-K allows an easy connection of LEDs to the sound module USM-RC-2 and to the extension module EXM-2 without additional resistors or soldering.

On the AKL-10-K are 10 separate and current limited outputs, which provide a current of about 20 mA independent from the supply voltage. This allows a simple connection of LEDs without additional resistors.

The AKL-10-K terminal clamp can be connected directly with a pluggable soldered ribbon cable to the USM-RC-2 and EXM-2.

The battery voltage is connected to the black screw terminal.
Using the spring-loaded terminal outputs 1 - 10 the LEDs can be connected quite easy.

You can find more information in the manual (PDF).

Technical Data

Supply voltage (Ub): 5 – 14 V DC
Double carried out screw terminal for supply voltage
Current consumption: Standby current: approx. 10 mA, each output + 20 mA
Outputs: 10 pieces
Plus (anode) and minus (cathode) of the LEDs must be connected
Connecting cable: 10 pin ribbon cable, 20 cm long, can be connected directly to sound module
Size: 53 x 52 x 20 mm
Weight: 35 g

Price (incl. VAT)

Reduction of German VAT from 19 % to 16 % from July until December 2020.

All prices in our online shop include 19 % VAT. Deliveries (B2C) within the EU receive a VAT discount in step 6.

The VAT change does not effect the net prices and thus deliveries outside the EU or B2B customers within the EU.

Terminal clamp AKL-10-K with constant current output
For sound modules USM-HL-2 and USM-RC-2
no longer available!
39,95 € Not known when available again

Included in delivery:
  • AKL-10-K module
  • Ribbon cable approx. 20 cm
  • Operating manual (German)

Customer reviews for this product

No customer reviews for this product so far.
You can write the first review.

To write a new review, please login to your customer account.

Login | Register