Graupner mc-32 und EMS-24-G

NMS-, EMS- MSC- und SMS-Module
Antworten
MichaelBM
Beiträge: 3
Registriert: Di 30. Jun 2015, 18:36

Graupner mc-32 und EMS-24-G

Beitrag von MichaelBM »

Hallo liebe Modellbauer

Ich habe folgendes:
- Graupner mc-32 (HoTT-Version 1.097)
- EMS-24-G für Graupner mc-32

Welche Fassung in der mc-32 muss ich verwenden, um eine Verbindung der EMS-24-G?

Es gibt kein Licht in der LED auf der EMS-24-G.

Wenn ich die EMS-24-G an einen freien 5-polige Buchse (roter Pfeil) in der mc-32 geht das System verrückt. Es ändert sich die Einstellung für die Batterie zu einer NiMH.

** ENGLISH **
Hello dear modelbuilders

I have the following:
- Graupner mc-32 (HoTT version 1.097)
- EMS-24-G for Graupner mc-32

Which socket in the mc-32 must I use to connect the EMS-24-G?

There is no light in the LED on the EMS-24-G.

When I connect the EMS-24-G to an available 5-pin socket (red arrow) in the mc-32 the system goes crazy. It changes the settings for the battery to a NiMH.
Dateianhänge
IMG_0925smallarrow.jpg
IMG_0925smallarrow.jpg (240.23 KiB) 4626 mal betrachtet
IMG_0925small.jpg
IMG_0925small.jpg (540.91 KiB) 4626 mal betrachtet
IMG_0924small.jpg
IMG_0924small.jpg (477.39 KiB) 4626 mal betrachtet
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Graupner mc-32 und EMS-24-G

Beitrag von BEIER-Electronic Andy »

Hello Michael,

the sockets (called UVR in the manual) are correct. But I don't know how the polarity is at these sockets...

Maybe you plugged in the EMS in the wrong direction. Can you check the polarity at the socket with a voltmeter?
The polarity from the EMS is:
orange: plus
brown: minus
MichaelBM
Beiträge: 3
Registriert: Di 30. Jun 2015, 18:36

Re: Graupner mc-32 und EMS-24-G

Beitrag von MichaelBM »

Hello

That did the trick.

I inserted the connector according to the German manual page 5. It doesn't work.

When I reversed it all problems are gone :D See attached picture.

Thanks!
Dateianhänge
IMG_0925smallpolarity.jpg
IMG_0925smallpolarity.jpg (246.67 KiB) 4617 mal betrachtet
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Graupner mc-32 und EMS-24-G

Beitrag von BEIER-Electronic Andy »

Thanks for your feedback and the picture!

Graupner have changed the connector type in their new transmitters... Because of this, the picture in our manual fits no more :cry:
MichaelBM
Beiträge: 3
Registriert: Di 30. Jun 2015, 18:36

Re: Graupner mc-32 und EMS-24-G

Beitrag von MichaelBM »

Please note that my mc-32 is one of the first models released by Graupner (bought 16-02-2012).
Antworten