Hallo liebe Modellbauer
Ich habe folgendes:
- Graupner mc-32 (HoTT-Version 1.097)
- EMS-24-G für Graupner mc-32
Welche Fassung in der mc-32 muss ich verwenden, um eine Verbindung der EMS-24-G?
Es gibt kein Licht in der LED auf der EMS-24-G.
Wenn ich die EMS-24-G an einen freien 5-polige Buchse (roter Pfeil) in der mc-32 geht das System verrückt. Es ändert sich die Einstellung für die Batterie zu einer NiMH.
** ENGLISH **
Hello dear modelbuilders
I have the following:
- Graupner mc-32 (HoTT version 1.097)
- EMS-24-G for Graupner mc-32
Which socket in the mc-32 must I use to connect the EMS-24-G?
There is no light in the LED on the EMS-24-G.
When I connect the EMS-24-G to an available 5-pin socket (red arrow) in the mc-32 the system goes crazy. It changes the settings for the battery to a NiMH.
Graupner mc-32 und EMS-24-G
Graupner mc-32 und EMS-24-G
- Dateianhänge
-
- IMG_0925smallarrow.jpg (240.23 KiB) 4631 mal betrachtet
-
- IMG_0925small.jpg (540.91 KiB) 4631 mal betrachtet
-
- IMG_0924small.jpg (477.39 KiB) 4631 mal betrachtet
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Graupner mc-32 und EMS-24-G
Hello Michael,
the sockets (called UVR in the manual) are correct. But I don't know how the polarity is at these sockets...
Maybe you plugged in the EMS in the wrong direction. Can you check the polarity at the socket with a voltmeter?
The polarity from the EMS is:
orange: plus
brown: minus
the sockets (called UVR in the manual) are correct. But I don't know how the polarity is at these sockets...
Maybe you plugged in the EMS in the wrong direction. Can you check the polarity at the socket with a voltmeter?
The polarity from the EMS is:
orange: plus
brown: minus
Re: Graupner mc-32 und EMS-24-G
Hello
That did the trick.
I inserted the connector according to the German manual page 5. It doesn't work.
When I reversed it all problems are gone
See attached picture.
Thanks!
That did the trick.
I inserted the connector according to the German manual page 5. It doesn't work.
When I reversed it all problems are gone
Thanks!
- Dateianhänge
-
- IMG_0925smallpolarity.jpg (246.67 KiB) 4622 mal betrachtet
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Graupner mc-32 und EMS-24-G
Thanks for your feedback and the picture!
Graupner have changed the connector type in their new transmitters... Because of this, the picture in our manual fits no more
Graupner have changed the connector type in their new transmitters... Because of this, the picture in our manual fits no more
Re: Graupner mc-32 und EMS-24-G
Please note that my mc-32 is one of the first models released by Graupner (bought 16-02-2012).