Hi Beier El...
I have a system that makes some effects on my light systems..
It uses common ground, and is to be placed between the light LED and a switch module...
I switch on the lights/lapms by connecting a negative pole to the respective lamp.
Can you tell me if the 7 multiswitch functions on you USM-RC has a fixed positive, and is switching on the negative poles ?
How does the the 7 functions switch ?
-
Sune Nielsen
- Beiträge: 10
- Registriert: So 6. Mär 2011, 11:25
Re: How does the the 7 functions switch ?
Hello Sune,
yes that's right, the USM use a fixed positive+ and the functions are all switched by negative-.
Common positiv+ and every connector used a single negative-.
Hope i've helped you a little....
Greetings Airknee
yes that's right, the USM use a fixed positive+ and the functions are all switched by negative-.
Common positiv+ and every connector used a single negative-.
Hope i've helped you a little....
Greetings Airknee
Gruß der Airknee 
-
Sune Nielsen
- Beiträge: 10
- Registriert: So 6. Mär 2011, 11:25
Re: How does the the 7 functions switch ?
Yes you did....
So this is perfect....
I'm close to go with the USM-RC then... I need 5 or 6 switches... So it's more than enough
And not much extra to get the sound-option
Thanks...
Beier feel free to verify the statement
So this is perfect....
I'm close to go with the USM-RC then... I need 5 or 6 switches... So it's more than enough
And not much extra to get the sound-option
Thanks...
Beier feel free to verify the statement
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: How does the the 7 functions switch ?
Yes, Airknee is right
The USM-RC switches the negative pole to the loads.
The USM-RC switches the negative pole to the loads.
-
Sune Nielsen
- Beiträge: 10
- Registriert: So 6. Mär 2011, 11:25
Re: How does the the 7 functions switch ?
And I can use the negative poles without using the positive poles? (in USM-RC)
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: How does the the 7 functions switch ?
Yes you can.
The positive pins of X3 are internaly just connected with X1/4.
The positive pins of X3 are internaly just connected with X1/4.