How does the the 7 functions switch ?

Soundmodul für Fahrgeräusche (speziell für RC-Modelle)
Antworten
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

How does the the 7 functions switch ?

Beitrag von Sune Nielsen »

Hi Beier El...

I have a system that makes some effects on my light systems..
It uses common ground, and is to be placed between the light LED and a switch module...

I switch on the lights/lapms by connecting a negative pole to the respective lamp.
Can you tell me if the 7 multiswitch functions on you USM-RC has a fixed positive, and is switching on the negative poles ?
Benutzeravatar
airknee
Beiträge: 400
Registriert: So 25. Jan 2009, 11:35
Wohnort: Fontanestadt Neuruppin

Re: How does the the 7 functions switch ?

Beitrag von airknee »

Hello Sune, :)

yes that's right, the USM use a fixed positive+ and the functions are all switched by negative-.

Common positiv+ and every connector used a single negative-.


Hope i've helped you a little....


Greetings Airknee :)
Gruß der Airknee :)
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

Re: How does the the 7 functions switch ?

Beitrag von Sune Nielsen »

Yes you did....

So this is perfect....
I'm close to go with the USM-RC then... I need 5 or 6 switches... So it's more than enough :)
And not much extra to get the sound-option :)

Thanks...

Beier feel free to verify the statement :)
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: How does the the 7 functions switch ?

Beitrag von BEIER-Electronic Andy »

Yes, Airknee is right :)

The USM-RC switches the negative pole to the loads.
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

Re: How does the the 7 functions switch ?

Beitrag von Sune Nielsen »

And I can use the negative poles without using the positive poles? (in USM-RC)
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: How does the the 7 functions switch ?

Beitrag von BEIER-Electronic Andy »

Yes you can.

The positive pins of X3 are internaly just connected with X1/4.
Antworten