Input X1/6-7 to Brake or reverse light

Ihr habt eine Idee, was wir an unseren Produkten noch verbessern könnten, dann lasst es uns wissen
Antworten
Leonard
Beiträge: 31
Registriert: Di 10. Jul 2012, 18:52

Input X1/6-7 to Brake or reverse light

Beitrag von Leonard »

I am using Servonaut E20 and therefore I run USM-RC-2 in Mix-mode.
Brake and reverse output from E20 is connected to Input X1/6-7 on USM-RC-2.
It is connected that way, so the signals will be transmitted via IR to the trailer.
It works fine as long as I use it to switch a specific output, but I want to use the combined rearlight, and therefore I need the brake-signal to connect to the function Brake.

I think it is not just easy, because it then have to disconnect the automatic brake and reverse detection from the speed of the engine.
Feel free to answer in german, I can read it but not write it.

Leonard - DK
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Input X1/6-7 to Brake or reverse light

Beitrag von BEIER-Electronic Andy »

Kommt in der V1.30 :D
Antworten