Interference

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Interference

Beitrag von BEIER-Electronic Andy »

Please test it with and without common ground.

@Scaniar500
How much space is between the USM-RC-2 and your receiver and the antenna? Can you make a photo of your composition?

And please another test:
Do you have the interference also, when you only connect the power with the 2 wires (X1/1 and X1/2) to the USM-RC-2 - no speaker, no servo cables (X2), no outputs (X3)?
Scaniar500
Beiträge: 4
Registriert: Sa 15. Jun 2013, 22:36

Re: Interference

Beitrag von Scaniar500 »

I post a video so you can see the problem yourself ;) http://youtu.be/mag_Wbi1zt4
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Interference

Beitrag von BEIER-Electronic Andy »

Please another test:
Do you have the interference also, when you only connect the power with the 2 wires (X1/1 and X1/2) to the USM-RC-2 - no speaker, no servo cables (X2), no outputs (X3)?
Scaniar500
Beiträge: 4
Registriert: Sa 15. Jun 2013, 22:36

Re: Interference

Beitrag von Scaniar500 »

I fixed my problem ! I maked evrything drive on 2.4 ghz . So i rebuilded my robbe futuba fc16
From 40 mhz to 2.4 ghz and a new reciever . Now it works perfect !
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: Interference

Beitrag von astecme »

In the past we have had similar problems with Futaba RX's. In my case this was in fast model boats in a lake surrounded by metal staves. We all switched to hitec and the problems went.

You can try wrapping the RX in metal foil and making the aerial upright at least 9 inches and as far from electrics as possible. Run the RX from a separate battery or try using a separate UBEC circuit to power the RX.
Antworten