Onboard Amplifier, connect 3rd speaker?

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
Dio
Beiträge: 10
Registriert: Do 7. Mär 2013, 08:43

Onboard Amplifier, connect 3rd speaker?

Beitrag von Dio »

At this moment im using your 50x50 4ohm/10w speaker at terminal 1 for speaker, and a really tiny 4ohm/3w at terminal 2. My question: Is it bad for the unit if i combined a second 4ohm/3w to the terminal 2?

JT
Norway
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Onboard Amplifier, connect 3rd speaker?

Beitrag von BEIER-Electronic Andy »

Hello JT,

the minimum impedance for each amplifier output is 4 ohm. When you connect a second speaker with 4 ohm to the other speaker with 4 ohm, you have then an impedance of only 2 ohm. And this is to low!

So it's not allowed to connect two speakers with 4 ohm to one output. If you do this, the amplifier is overloaded and it can be destroyed :!:
Dio
Beiträge: 10
Registriert: Do 7. Mär 2013, 08:43

Re: Onboard Amplifier, connect 3rd speaker?

Beitrag von Dio »

Thank you again for your feedback.I can only say of course. I should have remembered this from building car-sterio back in the days when i was young ;) . Probably got a blackout when i wrote the question :). And the speakers was 6ohm and not 4ohm as i said :D

JT
Norway
Antworten