output 11 doesn't work anymore

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

output 11 doesn't work anymore

Beitrag von darentz27 »

i think my output 11 is defect.
i connected a smoke generator and flashlight but none of them works.
i connected the smoke generator to output 8 and it works.
has anyone any idea if my outputs 11&12 are defect?
i don't use servo output 1&2
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: output 11 doesn't work anymore

Beitrag von BEIER-Electronic Andy »

Please look in the diagnosis (see page 75 in the manual), if you see a green circle when you activate the output 11.

If the output in the diagnosis is green but the output doesn't switch correct, then the output is defect. In the case, send the module to us (or we send a transistor if you can solder SMD).
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: output 11 doesn't work anymore

Beitrag von darentz27 »

all outputs turn green except output 11
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: output 11 doesn't work anymore

Beitrag von BEIER-Electronic Andy »

Please send me your projectfile (*.usm).
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: output 11 doesn't work anymore

Beitrag von darentz27 »

output 8 is the smokegenerator i set it to motion.
ouput 11 are the flashlights and output 12 is the brake light for my trailer
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: output 11 doesn't work anymore

Beitrag von BEIER-Electronic Andy »

I've tested your project, and it worked fine.
darentz27 hat geschrieben:all outputs turn green except output 11
This is crazy... :shock:
The diagnosis shows only what the output should do - even with a defect transistor, the circle should become green!

Do you have the datacable K-USB-2?
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: output 11 doesn't work anymore

Beitrag von darentz27 »

No i don't have the cable
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: output 11 doesn't work anymore

Beitrag von BEIER-Electronic Andy »

Ok, then please send the module to us. We will check and repair it.
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: output 11 doesn't work anymore

Beitrag von darentz27 »

where do i send the module to?
do you have an adress?
except i haven't bought it in your webshop.
I bought it by a dutch company.
should i contact them or can i send my module to you?
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: output 11 doesn't work anymore

Beitrag von BEIER-Electronic Andy »

It's better to send it directly to us:

BEIER-Electronic
Winterbacher Straße 52/4
73614 Schorndorf - Weiler
Germany

And please send also the SD card with your project.
Antworten