USM-RC-3 neutral position

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC-2
Antworten
hitochan
Beiträge: 3
Registriert: Do 15. Jan 2026, 15:11

USM-RC-3 neutral position

Beitrag von hitochan »

Hello

Is there a way to fix the neutral position of the USM-RC-3 to 1500 ms?

It's connected via S.BUS, but sometimes it's very out of sync.

Thanks in advance.
Dateianhänge
diag.png
diag.png (77.44 KiB) 1691 mal betrachtet
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: USM-RC-3 neutral position

Beitrag von Rascal »

Hello hitochan,

the USM-RC-3 reads those values from the respective SBUS channels assigned to Prop #1 and #2 during startup. It cannot fix what is send to it by the receiver, which in return gets the signals from the transmitter unless in failsafe.
Check and adjust your trim/subtrim if you need the values to be exact 1.500ms, although for the USM it shouldn't matter if the value is a bit off.
jhamm
Beiträge: 63
Registriert: Sa 5. Sep 2020, 15:33

Re: USM-RC-3 neutral position

Beitrag von jhamm »

It depends on the transmitter used.
If the centre positions of the sticks are not correct, recalibrate them.
Before doing so, check that something has been set in the outputs.
Antworten