multi switch robbe 1511

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

multi switch robbe 1511

Beitrag von marco polo »

hi beier team

i was wondering if the multi switch 1511 from robbe needs to be programed manualy
i experienced that when i switch on the main power
there where 3 sounds played
the sounds that are programend on
switch 5 down
switch 6 down
switch 7 down

in another post i also mentioned that switch 8 down has no funtion when used as multiswich 2
so i cannot say if the sound also plays at powerup
i only tried it as a second multi switch

nr 1 plays switch 1 up
nr 2 plays switch 1 down ( i acspected switch 2 up )
nr 3 plays switch 3 up
nr 4 plays swicht 4 up
nr 5 plays switch 5 up or switch 5 down there is no middel it is a flipswitch
nr 6 plays switch 6 up or switch 6 down there is no middel it is a flipswitch
nr 7 plays switch 7 up or switch 7 down there is no middel it is a flipswitch
nr 8 is a moment switch it toggels back in the down position
1511 robbe
1511 robbe
F1511.jpg (48.79 KiB) 2932 mal betrachtet
greets from holland

marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: multi switch robbe 1511

Beitrag von BEIER-Electronic Andy »

We don't have a 1511 here... But if the switches 5-8 have no middle positions, it's "normal" that the assigned sounds play at power on.
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: multi switch robbe 1511

Beitrag von marco polo »

thanks beier team

for the quick response
ok then if i am going to use it i will leave the slots empty
or assign them different

gr marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Antworten