hi beier team
i was wondering if the multi switch 1511 from robbe needs to be programed manualy
i experienced that when i switch on the main power
there where 3 sounds played
the sounds that are programend on
switch 5 down
switch 6 down
switch 7 down
in another post i also mentioned that switch 8 down has no funtion when used as multiswich 2
so i cannot say if the sound also plays at powerup
i only tried it as a second multi switch
nr 1 plays switch 1 up
nr 2 plays switch 1 down ( i acspected switch 2 up )
nr 3 plays switch 3 up
nr 4 plays swicht 4 up
nr 5 plays switch 5 up or switch 5 down there is no middel it is a flipswitch
nr 6 plays switch 6 up or switch 6 down there is no middel it is a flipswitch
nr 7 plays switch 7 up or switch 7 down there is no middel it is a flipswitch
nr 8 is a moment switch it toggels back in the down position
greets from holland
marco polo
multi switch robbe 1511
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
multi switch robbe 1511
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: multi switch robbe 1511
We don't have a 1511 here... But if the switches 5-8 have no middle positions, it's "normal" that the assigned sounds play at power on.
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
Re: multi switch robbe 1511
thanks beier team
for the quick response
ok then if i am going to use it i will leave the slots empty
or assign them different
gr marco polo
for the quick response
ok then if i am going to use it i will leave the slots empty
or assign them different
gr marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.