Seite 1 von 1

Problem with Robbe F1511 and jeti

Verfasst: Mo 21. Jul 2014, 13:11
von koos82
Hello

When I use the F1511 module from robbe with JETI 2,4ghz it starts to put on and off functions automaticly on the nautic 1 and 2
Is the a solutions for this problem?

Kind regards
Koos

Re: Problem with Robbe F1511 and jeti

Verfasst: Mo 21. Jul 2014, 14:04
von airknee
Leider fehlt uns deine Konfiguration, welchen Sendertyp du verwendest und so weiter.

Mit deinen Angaben können wir da kaum etwas sagen.

Wir brauchen erst alle Informationen, dann kann man dir besser helfen.

Gruß Airknee 8-)

Re: Problem with Robbe F1511 and jeti

Verfasst: Mo 21. Jul 2014, 14:14
von koos82
I use a Robbe futaba FC-18 transmitter wit 2 robbe F1511 multiswitch encoders.
I use Jeti Duplex TF modul.

let me know if you need other specifications

Koos

Re: Problem with Robbe F1511 and jeti

Verfasst: Mo 21. Jul 2014, 14:23
von BEIER-Electronic Andy
Hallo Koos,

bei Jeti sind zuerst einige Einstellungen mit der Jeti-Box sehr wichtig! Siehe Anleitung vom NMS-16 auf Seite 7.

Wenn das gemacht wurde, bitte so wie hier beschrieben vorgehen:
Hilfe, mein Nautic-/Multiswitchmodul funktioniert nicht

Re: Problem with Robbe F1511 and jeti

Verfasst: Mo 21. Jul 2014, 14:48
von airknee
Hast du die Grundeinstellung für Jeti vorgenommen?

"Output Period ------- By Transmitter" und Dual Rate auf Maximum.

Das musst du zuerst tun. Dann gehts weiter,,,,,,

Re: Problem with Robbe F1511 and jeti

Verfasst: So 17. Mai 2015, 12:43
von koos82
Hello,

allmost a year later now, but the problem is solved now.
I now use different encoder modules and the problem is gone, as soon as i use the original robbe switches again , the problem is back.

so my advise, don't use the robbe switches, but the original from beier.

kind regards
Koos