Hello
When I use the F1511 module from robbe with JETI 2,4ghz it starts to put on and off functions automaticly on the nautic 1 and 2
Is the a solutions for this problem?
Kind regards
Koos
Problem with Robbe F1511 and jeti
Re: Problem with Robbe F1511 and jeti
Leider fehlt uns deine Konfiguration, welchen Sendertyp du verwendest und so weiter.
Mit deinen Angaben können wir da kaum etwas sagen.
Wir brauchen erst alle Informationen, dann kann man dir besser helfen.
Gruß Airknee
Mit deinen Angaben können wir da kaum etwas sagen.
Wir brauchen erst alle Informationen, dann kann man dir besser helfen.
Gruß Airknee
Gruß der Airknee 
Re: Problem with Robbe F1511 and jeti
I use a Robbe futaba FC-18 transmitter wit 2 robbe F1511 multiswitch encoders.
I use Jeti Duplex TF modul.
let me know if you need other specifications
Koos
I use Jeti Duplex TF modul.
let me know if you need other specifications
Koos
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Problem with Robbe F1511 and jeti
Hallo Koos,
bei Jeti sind zuerst einige Einstellungen mit der Jeti-Box sehr wichtig! Siehe Anleitung vom NMS-16 auf Seite 7.
Wenn das gemacht wurde, bitte so wie hier beschrieben vorgehen:
Hilfe, mein Nautic-/Multiswitchmodul funktioniert nicht
bei Jeti sind zuerst einige Einstellungen mit der Jeti-Box sehr wichtig! Siehe Anleitung vom NMS-16 auf Seite 7.
Wenn das gemacht wurde, bitte so wie hier beschrieben vorgehen:
Hilfe, mein Nautic-/Multiswitchmodul funktioniert nicht
Re: Problem with Robbe F1511 and jeti
Hast du die Grundeinstellung für Jeti vorgenommen?
"Output Period ------- By Transmitter" und Dual Rate auf Maximum.
Das musst du zuerst tun. Dann gehts weiter,,,,,,
"Output Period ------- By Transmitter" und Dual Rate auf Maximum.
Das musst du zuerst tun. Dann gehts weiter,,,,,,
Gruß der Airknee 
Re: Problem with Robbe F1511 and jeti
Hello,
allmost a year later now, but the problem is solved now.
I now use different encoder modules and the problem is gone, as soon as i use the original robbe switches again , the problem is back.
so my advise, don't use the robbe switches, but the original from beier.
kind regards
Koos
allmost a year later now, but the problem is solved now.
I now use different encoder modules and the problem is gone, as soon as i use the original robbe switches again , the problem is back.
so my advise, don't use the robbe switches, but the original from beier.
kind regards
Koos