Seite 1 von 1
Beier sound for 2.4ghz rx18
Verfasst: Mo 15. Jul 2013, 22:02
von superguybrett
Hi all, The guys from rctankwarfare advised me to post on your forums for advice and help.
I have a Torro proffesional king tiger with the taigen 2.4ghz control system and would love to replace the awful sound with a beier soundmodule.
I understand that the usm-hl wont work with formentioned control method.
Which one would be suitable for my needs, and how hard is it to set sound up so it sounds like real king tiger.
Thanks for any help you can offer.
Re: Beier sound for 2.4ghz rx18
Verfasst: Di 16. Jul 2013, 13:01
von BEIER-Electronic Andy
It's correct, the USM-HL doesn't work with the 2,4GHz from Taigen.
It is possible to connect the
USM-RC-2 (in analogue mode) and an
OKA-4 to the tank electronics to get a better sound. Please look at this wiring diagram:
http://www.beier-electronic.de/modellba ... 0RX-18.pdf
But in the analogue mode you can't use the many possible functions of the USM-RC-2...
Re: Beier sound for 2.4ghz rx18
Verfasst: Mo 22. Jul 2013, 18:14
von deltaflyer7
Hallo liebes Beier-Team, kurze Frage zum Schaltplan im PDF: Mit welchem Programm Zeichnet ihr diese Schaltpläne? Etwa mit Eagle? Wenn ja, könntet ihr für das USM-RC2 und vielleicht auch weitere eurer Produkte die Bauteil (Baustein)- Bibliotheken, also die .lbr Dateien zum Download zur Verfügung stellen?
Gruss Stefan
Re: Beier sound for 2.4ghz rx18
Verfasst: Di 23. Jul 2013, 11:37
von BEIER-Electronic Andy
Ja, wir zeichnen die Schaltpläne mit Eagle. Ich habe die Bibliothek mal angehängt. Allerdings sind da nicht soooo viele Sachen drinnen - und auch ein paar Sachen, die nichts mit dem Modellbau zu tun haben.
Re: Beier sound for 2.4ghz rx18
Verfasst: Di 23. Jul 2013, 14:41
von deltaflyer7
Hallo liebes Beier-Team,
vielen herzlichen Dank für die Library - ist echt cool und genau was ich brauche.
Da ich für jedes Funktions-Modell immer auch noch nen Kompletten Schalt- und Stromlauf/Verteiler-Plan erstelle, kann ich das sehr gut gebrauchen. Da eines der beiden Boote, die ich momentan paralell baue, bereits jetzt verkauft ist, ist es natürlich wichtig, entsprechende Unterlagen mitgeben zu können.
Also, nochmals herzlichen Dank.
Liebe Grüsse aus der Schweiz
Stefan