Seite 1 von 1

Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 1. Jan 2013, 09:13
von gismow
Moin, moin...

Ich würde gerne die Rücklichter einschalten wenn mindestens eine der folgenden Ausgangstypen geschaltet sind:
- Standlicht
- Abblendlicht
- Fernlicht

Ich kann sie ja nicht einfach mit in alle 3 Kreisläufe einhängen.

Vielen Dank.

Greetinx
gismow

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 1. Jan 2013, 15:29
von marco polo
hi gismow

did you try the option combined rearlights (kombiniertes rucklicht) for the rear lights
and the combined frontlights (kombiniertes frontlicht) for the front lights
whit these options you have 1 output for the frontlights and 1 output for the rear lights
the brightnes can be adjusted
see pages 40 /43 and page 59 of the manuel

i think this is what you mean

greetings from holland
marco polo

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 1. Jan 2013, 20:37
von gismow
Hi Marco Polo,

I think of not. The combined backlight means the the standard back light and the brake are combined on the same LED. That's not what I'm searching for.

I do have backlights and brakes seperated on different LEDs.

In the front I realized the position light, the dim light, the upper beam headlights and daylight running lights. What I'm searching for is a solution that the backlight is activated if one or more of these lights is activated.

So the combined front light is also no option.

Kind regards and greetings to holland
gismow

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 1. Jan 2013, 21:05
von marco polo
ok gismow

i undestand what you need
if you use combined rear lights
and program intensity say 50% and leave option 1 for the brake lights 0% and option 2 for the rear fog lights ad 0%
than the rear lights works when you switch on
parking light , low and highbeam
and the brake lights and foglights will have no effect on this output

greets

marco polo

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Mi 2. Jan 2013, 14:53
von gismow
Hi Marco Polo,

it's a good idea. I'll try out and let you know, but it will take some days.

Kind regards
gismow

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 8. Jan 2013, 13:00
von BEIER-Electronic Andy
gismow hat geschrieben: Ich würde gerne die Rücklichter einschalten wenn mindestens eine der folgenden Ausgangstypen geschaltet sind:
- Standlicht
- Abblendlicht
- Fernlicht
Hallo gismow,

das geht ganz gut mit dem "Kombinierten Frontlicht". Der Begriff "Frontlicht" ist in Deinem Fall vielleicht etwas verwirrend, weil Du ja eigentlich ein Rücklicht haben willst. Aber das kombinierte Frontlicht vereint ja genau die von Dir gewünschten 3 Lichter auf einen Ausgang. In diesem speziellen Fall musst Du die 3 Helligkeiten dann aber auf den gleichen Wert einstellen, damit das Rücklicht dann auch immer gleich hell leuchtet.

Re: Rücklichter einschalten bei unterschiedlichen Lichtarten

Verfasst: Di 8. Jan 2013, 19:32
von gismow
Cool, vielen Dank für den Tipp.

Greetinx
gismow