Moin, moin...
Ich würde gerne die Rücklichter einschalten wenn mindestens eine der folgenden Ausgangstypen geschaltet sind:
- Standlicht
- Abblendlicht
- Fernlicht
Ich kann sie ja nicht einfach mit in alle 3 Kreisläufe einhängen.
Vielen Dank.
Greetinx
gismow
Rücklichter einschalten bei unterschiedlichen Lichtarten
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
hi gismow
did you try the option combined rearlights (kombiniertes rucklicht) for the rear lights
and the combined frontlights (kombiniertes frontlicht) for the front lights
whit these options you have 1 output for the frontlights and 1 output for the rear lights
the brightnes can be adjusted
see pages 40 /43 and page 59 of the manuel
i think this is what you mean
greetings from holland
marco polo
did you try the option combined rearlights (kombiniertes rucklicht) for the rear lights
and the combined frontlights (kombiniertes frontlicht) for the front lights
whit these options you have 1 output for the frontlights and 1 output for the rear lights
the brightnes can be adjusted
see pages 40 /43 and page 59 of the manuel
i think this is what you mean
greetings from holland
marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
Hi Marco Polo,
I think of not. The combined backlight means the the standard back light and the brake are combined on the same LED. That's not what I'm searching for.
I do have backlights and brakes seperated on different LEDs.
In the front I realized the position light, the dim light, the upper beam headlights and daylight running lights. What I'm searching for is a solution that the backlight is activated if one or more of these lights is activated.
So the combined front light is also no option.
Kind regards and greetings to holland
gismow
I think of not. The combined backlight means the the standard back light and the brake are combined on the same LED. That's not what I'm searching for.
I do have backlights and brakes seperated on different LEDs.
In the front I realized the position light, the dim light, the upper beam headlights and daylight running lights. What I'm searching for is a solution that the backlight is activated if one or more of these lights is activated.
So the combined front light is also no option.
Kind regards and greetings to holland
gismow
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
ok gismow
i undestand what you need
if you use combined rear lights
and program intensity say 50% and leave option 1 for the brake lights 0% and option 2 for the rear fog lights ad 0%
than the rear lights works when you switch on
parking light , low and highbeam
and the brake lights and foglights will have no effect on this output
greets
marco polo
i undestand what you need
if you use combined rear lights
and program intensity say 50% and leave option 1 for the brake lights 0% and option 2 for the rear fog lights ad 0%
than the rear lights works when you switch on
parking light , low and highbeam
and the brake lights and foglights will have no effect on this output
greets
marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
Hi Marco Polo,
it's a good idea. I'll try out and let you know, but it will take some days.
Kind regards
gismow
it's a good idea. I'll try out and let you know, but it will take some days.
Kind regards
gismow
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
Hallo gismow,gismow hat geschrieben: Ich würde gerne die Rücklichter einschalten wenn mindestens eine der folgenden Ausgangstypen geschaltet sind:
- Standlicht
- Abblendlicht
- Fernlicht
das geht ganz gut mit dem "Kombinierten Frontlicht". Der Begriff "Frontlicht" ist in Deinem Fall vielleicht etwas verwirrend, weil Du ja eigentlich ein Rücklicht haben willst. Aber das kombinierte Frontlicht vereint ja genau die von Dir gewünschten 3 Lichter auf einen Ausgang. In diesem speziellen Fall musst Du die 3 Helligkeiten dann aber auf den gleichen Wert einstellen, damit das Rücklicht dann auch immer gleich hell leuchtet.
Re: Rücklichter einschalten bei unterschiedlichen Lichtarten
Cool, vielen Dank für den Tipp.
Greetinx
gismow
Greetinx
gismow