Seite 1 von 1
Indicator
Verfasst: Do 14. Nov 2019, 18:51
von marco polo
Hi Andy,
there is a little failiure in the indicator settings.

- indicatoir
- indicator.png (4.49 KiB) 4580 mal betrachtet
the setting are switched.
could you fix this in the next update.
Re: Indicator
Verfasst: Fr 15. Nov 2019, 08:11
von BEIER-Electronic Andy
Hello Marc,
which version von Sound-Teacher do you use?
In V1.10a it works well for me.
Re: Indicator
Verfasst: Mo 18. Nov 2019, 15:00
von marco polo
Hi Andy,
Yes I am using version V1.10a
Activation of indicator by prop channel nr5.
Long in position A/D memory set value 100ms.
When i change the valleu for the off treshold notthing happens when the prop 2 goes trough neutral
When I change the valleu for the on treshold the indicator switches off when prop 2 goes trough the neutral and the set valley of the opposit direction.
For me it works fine whit a valleu between 10 and 15.
Hope I made it all clear
Re: Indicator
Verfasst: Mo 18. Nov 2019, 15:17
von BEIER-Electronic Andy
These 2 values are actually for the automatic flashing, when turning via steereing (prop #2). But that you have not activated (which I didn't see last time).
I have to check it with your settings...
Re: Indicator
Verfasst: Mo 18. Nov 2019, 16:08
von marco polo
Oke
Then it cancels my command to turn it on.
Re: Indicator
Verfasst: Di 19. Nov 2019, 08:18
von BEIER-Electronic Andy
The thresholds are working also when the option "Automatic indicator lights while turning" is deactivated. Then the thresholds serve to monitor whether it has been steered.
But I think the direction of your steering is inverted (left and right changed). Not at your steering servo, but in our internal steering monitoring.
Try to change this setting and the thresholds should be correct:

- invert_steering.png (7.28 KiB) 4480 mal betrachtet
Re: Indicator
Verfasst: Di 19. Nov 2019, 15:43
von marco polo
thanks Andy,
thats the isseu.
i unchecked the box, now it's working fine.