Indicator

Soundmodul und Fahrtregler in einem Modul
Antworten
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Indicator

Beitrag von marco polo »

Hi Andy,

there is a little failiure in the indicator settings.

indicatoir
indicatoir
indicator.png (4.49 KiB) 4574 mal betrachtet
the setting are switched.
could you fix this in the next update.
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Indicator

Beitrag von BEIER-Electronic Andy »

Hello Marc,

which version von Sound-Teacher do you use?

In V1.10a it works well for me.
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: Indicator

Beitrag von marco polo »

Hi Andy,

Yes I am using version V1.10a

Activation of indicator by prop channel nr5.
Long in position A/D memory set value 100ms.
When i change the valleu for the off treshold notthing happens when the prop 2 goes trough neutral
When I change the valleu for the on treshold the indicator switches off when prop 2 goes trough the neutral and the set valley of the opposit direction.
For me it works fine whit a valleu between 10 and 15.

Hope I made it all clear
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Indicator

Beitrag von BEIER-Electronic Andy »

These 2 values are actually for the automatic flashing, when turning via steereing (prop #2). But that you have not activated (which I didn't see last time).

I have to check it with your settings...
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: Indicator

Beitrag von marco polo »

Oke

Then it cancels my command to turn it on.
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Indicator

Beitrag von BEIER-Electronic Andy »

The thresholds are working also when the option "Automatic indicator lights while turning" is deactivated. Then the thresholds serve to monitor whether it has been steered.

But I think the direction of your steering is inverted (left and right changed). Not at your steering servo, but in our internal steering monitoring.

Try to change this setting and the thresholds should be correct:
invert_steering.png
invert_steering.png (7.28 KiB) 4474 mal betrachtet
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: Indicator

Beitrag von marco polo »

thanks Andy,

thats the isseu.
i unchecked the box, now it's working fine.
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Antworten