Seite 1 von 1

Graupner mc-32 und EMS-24-G

Verfasst: Di 30. Jun 2015, 20:03
von MichaelBM
Hallo liebe Modellbauer

Ich habe folgendes:
- Graupner mc-32 (HoTT-Version 1.097)
- EMS-24-G für Graupner mc-32

Welche Fassung in der mc-32 muss ich verwenden, um eine Verbindung der EMS-24-G?

Es gibt kein Licht in der LED auf der EMS-24-G.

Wenn ich die EMS-24-G an einen freien 5-polige Buchse (roter Pfeil) in der mc-32 geht das System verrückt. Es ändert sich die Einstellung für die Batterie zu einer NiMH.

** ENGLISH **
Hello dear modelbuilders

I have the following:
- Graupner mc-32 (HoTT version 1.097)
- EMS-24-G for Graupner mc-32

Which socket in the mc-32 must I use to connect the EMS-24-G?

There is no light in the LED on the EMS-24-G.

When I connect the EMS-24-G to an available 5-pin socket (red arrow) in the mc-32 the system goes crazy. It changes the settings for the battery to a NiMH.

Re: Graupner mc-32 und EMS-24-G

Verfasst: Mi 1. Jul 2015, 07:48
von BEIER-Electronic Andy
Hello Michael,

the sockets (called UVR in the manual) are correct. But I don't know how the polarity is at these sockets...

Maybe you plugged in the EMS in the wrong direction. Can you check the polarity at the socket with a voltmeter?
The polarity from the EMS is:
orange: plus
brown: minus

Re: Graupner mc-32 und EMS-24-G

Verfasst: Mi 1. Jul 2015, 09:47
von MichaelBM
Hello

That did the trick.

I inserted the connector according to the German manual page 5. It doesn't work.

When I reversed it all problems are gone :D See attached picture.

Thanks!

Re: Graupner mc-32 und EMS-24-G

Verfasst: Fr 3. Jul 2015, 07:16
von BEIER-Electronic Andy
Thanks for your feedback and the picture!

Graupner have changed the connector type in their new transmitters... Because of this, the picture in our manual fits no more :cry:

Re: Graupner mc-32 und EMS-24-G

Verfasst: Fr 10. Jul 2015, 09:38
von MichaelBM
Please note that my mc-32 is one of the first models released by Graupner (bought 16-02-2012).