Moin, moin...
Der Anschluss am M20+ für das Soundmodul ist nur für Servonaut Module, es ist kein simuliertes Fahrsignal wie z. B. beim E20.
Am M20+ muss man den Mixed Modus über den Motor nehmen.
Greetinx
gismow
Welchen Fahrregler?
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Welchen Fahrregler?
Danke für die Info!
Re: Welchen Fahrregler?
The Servonaut SMX sound light unit states that the input for engine sound control can be from a servo input if a normal esc is used OR the output from servonaut units - e.g. M20+. The M20+ works on full stick operation but normal ESC's are only half stick fwds and half reverse. SO I think the input to the SMX is indeed a standard servo input BUT it must detect the "neutral" position at switch on and work accordingly.
If this is true then I think that you should be able to configure the USM-RC2 to work with it by - one the gear /engine sound mapping picture - pull the green zero bar all the way to the left - i.e. so that the full width is forwards. The M20 will give the full range of signal and this ought to work
I HAVE NOT TRIED THIS JUST READ THE MANUALS.
If this is true then I think that you should be able to configure the USM-RC2 to work with it by - one the gear /engine sound mapping picture - pull the green zero bar all the way to the left - i.e. so that the full width is forwards. The M20 will give the full range of signal and this ought to work
I HAVE NOT TRIED THIS JUST READ THE MANUALS.