Welchen Fahrregler?

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Benutzeravatar
gismow
Beiträge: 215
Registriert: Sa 28. Apr 2012, 11:15
Wohnort: Dortmund

Re: Welchen Fahrregler?

Beitrag von gismow »

Moin, moin...

Der Anschluss am M20+ für das Soundmodul ist nur für Servonaut Module, es ist kein simuliertes Fahrsignal wie z. B. beim E20.

Am M20+ muss man den Mixed Modus über den Motor nehmen.

Greetinx
gismow
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Welchen Fahrregler?

Beitrag von BEIER-Electronic Andy »

Danke für die Info!
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: Welchen Fahrregler?

Beitrag von astecme »

The Servonaut SMX sound light unit states that the input for engine sound control can be from a servo input if a normal esc is used OR the output from servonaut units - e.g. M20+. The M20+ works on full stick operation but normal ESC's are only half stick fwds and half reverse. SO I think the input to the SMX is indeed a standard servo input BUT it must detect the "neutral" position at switch on and work accordingly.

If this is true then I think that you should be able to configure the USM-RC2 to work with it by - one the gear /engine sound mapping picture - pull the green zero bar all the way to the left - i.e. so that the full width is forwards. The M20 will give the full range of signal and this ought to work

I HAVE NOT TRIED THIS JUST READ THE MANUALS.
Antworten