hi every one
802° send me a pm in wich he asked how i made the shift sounds
so here some answers about it
the sounds are made from a cd
first i made a wave file from the track with goldwave
second i cut all the parts i did not needed from the file
then did some triming on the start en end to the file
the did some volume and a litle eq boost
i used 5 gears in the set up of the usm
i filed the vehicle start sound slot with the sound file
and all the 4 shift sound slot whit the same file
then i adjusted the moments when the shift files are played bij configuration engine sound
these are the red lines that you can move to the left or right
just play with them because every truck needs different settings
the start sound and the shift sound are uploaded in the soundcenter under
Home / Fahrsounds für das Soundmodul USM-RC / Scania V8 R143
and some aditional sounds under
Home / Zusatzsounds - Autos und Trucks
i hope i made it all clear to you all
greetings from the netherlands
ps a little gift
watch and be amazed
http://www.youtube.com/watch?v=vG7r9bDnCMQ
