hydraulic sound ??

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
kamyoncu-itulu1
Beiträge: 10
Registriert: So 4. Okt 2015, 15:40

hydraulic sound ??

Beitrag von kamyoncu-itulu1 »

Hallo, I have usm rc-2 All functions okay but, I want to get sound when I lift dumper body. ( same like servonaut)

When I open second motor sound, it does not be realistic. Do you have any other idea ?
Benutzeravatar
Oldchap
Beiträge: 1146
Registriert: Do 10. Mär 2011, 14:13
Wohnort: Raum Fürth / Bayern

Re: hydraulic sound ??

Beitrag von Oldchap »

I use a hydraulic sound in "Zusatzsounds", triggered by a Beier electronic switch. If one of my "hydraulic action channels" is a little out of neutral point, the sound starts.
Gruß

Gerhard
_________________
Panzermodelle 1:6
kamyoncu-itulu1
Beiträge: 10
Registriert: So 4. Okt 2015, 15:40

Re: hydraulic sound ??

Beitrag von kamyoncu-itulu1 »

thank you for help, unfortunately it works a couple second than stop, what should I do for continios sound ??
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: hydraulic sound ??

Beitrag von BEIER-Electronic Andy »

Which sound slots do you use? Please upload your project file (*.usm).
kamyoncu-itulu1
Beiträge: 10
Registriert: So 4. Okt 2015, 15:40

Re: hydraulic sound ??

Beitrag von kamyoncu-itulu1 »

Hello, I just uploaded. I used 2. chanel for hydrolic
Dateianhänge
SON_MB-NG.usm
(38.21 KiB) 255-mal heruntergeladen
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: hydraulic sound ??

Beitrag von BEIER-Electronic Andy »

Ok, this is easy. Just change the playback mode of the additional sound 17 from "once / complete" to "loop / immed. stop".
beispiel_abspielmodus.png
beispiel_abspielmodus.png (26.13 KiB) 6223 mal betrachtet
kamyoncu-itulu1
Beiträge: 10
Registriert: So 4. Okt 2015, 15:40

Re: hydraulic sound ??

Beitrag von kamyoncu-itulu1 »

thank you so much for solution, I am going to add a nice video of my truck with beier system. I am really happy with it.
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: hydraulic sound ??

Beitrag von astecme »

If you use a servo for working the hydraulic from the USM then you can use that to trigger the sound. On the additional sound page scroll down until you find "sound from servo 1 left" etc, you can then use two different sounds on the servo, one for under load and one when not. I use these for my wrecker opening and closing the wing doors and raising/lowering the hidden axle.
kamyoncu-itulu1
Beiträge: 10
Registriert: So 4. Okt 2015, 15:40

Re: hydraulic sound ??

Beitrag von kamyoncu-itulu1 »

thank you for a new idea,

https://www.youtube.com/watch?v=ek_NAqf-0cg

I am done with my truck. Here is the video hopefully you guys like it
Benutzeravatar
Ralph Cornell
Beiträge: 741
Registriert: So 12. Jul 2015, 12:40
Wohnort: Berlin

Re: hydraulic sound ??

Beitrag von Ralph Cornell »

I have seen your video. This truck is a very fine piece of craftwork. :D
Antworten