Hello
I use all the proportional on my radio to drive my wheel-loader. How can I use switcthes on my radio to switch of and on lights, sound, etc? Use a direct switch on the module to "start" the machine for now, but I want to remote-start it. I have this functions on my trucks, because of free proportinal channels. Tought the ekmfa function would do the trick, but it seems that I have problem with understanding this function. I will be very happy if someone will guide me in the right direction. And yes, I have read the manual (many times), but never the less, something importend haven't reached me.
Tnx
Müller, Norway
Proportional channel
Re: Proportional channel
Hello back,
I mean your problem are the missing prop-channels. These are neccessary also for switching functions such as engine remote start, Light and so on. Also with multi function modules you need at least one prop channel to transmit the switching functions. Without any free prop channel your RCU is not usable together with the -RC2. Some RCUs like Graupner HoTT use prop channels for switching purposes; they are able to steer the -RC2.
As "first aid" you could use the autostart functionality of the -RC2, which allows to start the engine by slightly moving your gas piston.
An useful RC equipment has at least four free prop channels to use all the mighty functions of the -RC2. RCUs up to 256 prop channels are available.
I mean your problem are the missing prop-channels. These are neccessary also for switching functions such as engine remote start, Light and so on. Also with multi function modules you need at least one prop channel to transmit the switching functions. Without any free prop channel your RCU is not usable together with the -RC2. Some RCUs like Graupner HoTT use prop channels for switching purposes; they are able to steer the -RC2.
As "first aid" you could use the autostart functionality of the -RC2, which allows to start the engine by slightly moving your gas piston.
An useful RC equipment has at least four free prop channels to use all the mighty functions of the -RC2. RCUs up to 256 prop channels are available.
Gruß
Gerhard
_________________
Panzermodelle 1:6
Gerhard
_________________
Panzermodelle 1:6
Re: Proportional channel
Tnx for responding. Maybe I'm a little confused about the terms regarding the radio. My understanding is that the sticks thats called prop channels. I have a spectrum dx10t, and enough free channels. Anyway, the sticks movement (channels) is used to control the machine, but it is a idea to start the sound with a little movement of the throttle. So you telling me that I can't use any of the switches, pots etc to control the module in anyway?
Müller
Müller
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Proportional channel
If you can control a servo with a switch, then you can trigger functions (A and D) via the proportional inputs at the soundmodul.
The big question is: Are you able to controll a servo with the switch?
The big question is: Are you able to controll a servo with the switch?
Re: Proportional channel
Yes I can control a servo with all switches and pots. I have 2 way switches on/off (can use it to lock backdoor on a tipper controlled with a servo), tree way switches on/off/on (to use for a esc on a electric tipper function, or a servo) I have potmeters (to use to control esc for hydraulic pump, or a servo) All programable to meet my desire. I got dipswitches on the sticks which I haven't explored yet, but maybe I can use them to trigger the sound/lights functions on the beier.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Proportional channel
Then it should be no problem to use the EKMFA mode witch a 3 way switch.
Re: Proportional channel
Just want to point out that EKMFA only works on Prop-#3 of the USM.
Alternatively try the Proportional-Channels configuration (A and D area); if your remote can mix two 3-way switches onto one channel you may also be able to use B and C. In that case you could trigger 8 functions via one channel (4 areas with long and short each).
As suggested above use a Servo first to test - with the mixer it should be able to stop in 4 different positions beside the neutral. Else it's just two positions (full left and right).
Alternatively try the Proportional-Channels configuration (A and D area); if your remote can mix two 3-way switches onto one channel you may also be able to use B and C. In that case you could trigger 8 functions via one channel (4 areas with long and short each).
As suggested above use a Servo first to test - with the mixer it should be able to stop in 4 different positions beside the neutral. Else it's just two positions (full left and right).
Re: Proportional channel
Thankyou
Tried to use ekmfa on #3, as a trigger directly from reciever. Didn't work, and ca see why. It is a bit clearer now that you explain it for me. Didn't struck me to use a servo for testing this (I use servos for testing on everthing else) I will try this during the eastern, if I got spare time...
Much appreciated your help
Tried to use ekmfa on #3, as a trigger directly from reciever. Didn't work, and ca see why. It is a bit clearer now that you explain it for me. Didn't struck me to use a servo for testing this (I use servos for testing on everthing else) I will try this during the eastern, if I got spare time...
Much appreciated your help