Multifunction with additional sounds V1.30d

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Multifunction with additional sounds V1.30d

Beitrag von astecme »

When assigning an additional sound to the Multifunction I get a warning saying that the sound is already in use. However it is not.
usm-RC-2.jpg
usm-RC-2.jpg (225.78 KiB) 4039 mal betrachtet
The attached picture shows the "error"
Benutzeravatar
Oldchap
Beiträge: 1146
Registriert: Do 10. Mär 2011, 14:13
Wohnort: Raum Fürth / Bayern

Re: Multifunction with additional sounds V1.30d

Beitrag von Oldchap »

Hello,

input sounds are not shown here. Is it sure that the sound is not used in accordance with an input?
Gruß

Gerhard
_________________
Panzermodelle 1:6
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Multifunction with additional sounds V1.30d

Beitrag von Rascal »

I think oldchap is right, I get the same error if the sound is assigned to an input, if it's assigned to e.g. a Nautic switch or prop channel it will indicate that instead, so the error message gives a hint where to look (see tab "Inputs").
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: Multifunction with additional sounds V1.30d

Beitrag von astecme »

Lol - not an input sound - an additional sound. and ths was never on an input selection previously.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Multifunction with additional sounds V1.30d

Beitrag von BEIER-Electronic Andy »

Hello Allan,

can you please send me your project file?
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: Multifunction with additional sounds V1.30d

Beitrag von astecme »

I would but it would not help - now that I have gone through the assignment- It does not do it the second time.
Antworten