Hello,
Firstly your latest release of software is really exciting. (1.30d)
With more people using Arduino or Raspberry PI in their models would you consider a digital interface to trigger events. A bit like you have the nautic tabs perhaps an new digital tab!
This could simply be for example a neat way to allow PWM switching - Allow micro controlling to quickly supply PWM for x microseconds to trigger event 1
eg:
PWM 1010ms for 10ms trigger event 1 PWM 1020 for 10ms trigger event 2.
Or perhaps a serial interface to trigger events.
I'm sure you know what I am suggesting would be really neat if you could trigger 50 (or more) (why not all!) events from a Arduino/PI etc
Perhaps you could enter your own PWM pulse length for x seconds against on a mapping table against events.
I am using a 4d systems Touchscreen to Arduino Due to XBee then Xbee to Due to USMRC2 to trigger events but it seems a backward step to provide PWM for 30ms to trigger an event which could be much faster perhaps
What do you think? - I do realise that this is easy on paper and probably very difficult to implement alongside what you have already developed.
Regards
Jonathan
A USM RC2 convert and advocate:)
Digital or Serial switching to trigger events
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Digital or Serial switching to trigger events
Hello Jonathan,
there is already a way to trigger all (128) functions via the serial port at X9. We use this to activate the functions with the Sound-Teacher (menu Help -> Control sound modul function with data cable).
But I think we have to make some little changes in the firmware, if you want to use this not only for testing purpose.
If you want I can explain (next week) how this works and what commands you have to send.
there is already a way to trigger all (128) functions via the serial port at X9. We use this to activate the functions with the Sound-Teacher (menu Help -> Control sound modul function with data cable).
But I think we have to make some little changes in the firmware, if you want to use this not only for testing purpose.
If you want I can explain (next week) how this works and what commands you have to send.
Re: Digital or Serial switching to trigger events
Wow!
You guys are truly remarkable in the functionality you have created!!!!!!
Yes please I would love to know the commands/baud rate etc.
I guess I could always try and read the signal at the end of the cable with a terminal program but if you could let me know the tech detail that would be stunning.
Thank you in advance
Wow
Jonathan
You guys are truly remarkable in the functionality you have created!!!!!!
Yes please I would love to know the commands/baud rate etc.
I guess I could always try and read the signal at the end of the cable with a terminal program but if you could let me know the tech detail that would be stunning.
Thank you in advance
Wow
Jonathan
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Digital or Serial switching to trigger events
Ok, let's try...
The baud rate is 115200 8N1.
You have to send always 4 bytes to the USM-RC-2:
1. Byte: Always 170 (0xaa hex)
2. Byte: Command (4 or 5)
3. Byte: Parameter (0 - 128)
4. Byte: Value (0=off, 1=on)
The USM-RC-2 send an answer block with 128 Bytes back. The first byte is always the command number you've sent. You can ignore all other bytes.
First, you have to send once the command 4 with the parameter 1: 170 4 1 0. This disables the normal function trigger (via prop., nautic, EKMFA, inputs), because both (normal and RS232) are not possible at the same time.
At command 5, the parameter is the function number you want to switch, shown in this list (only in German at the moment):
Example:
If you want to switch on output 2 you have to send: 170 5 32 1. All functions are memory functions. The output 5 stays on, until you send a 170 5 32 0 to the USM-RC-2.
Restrictions in V1.30d:
- The USM-RC-2 can receive and handle only one command every 10 ms.
- After receiving a command 5 there is an artificial delay of 5 ms (flashing the blue LED) which may cause an interruption in sound output.
The baud rate is 115200 8N1.
You have to send always 4 bytes to the USM-RC-2:
1. Byte: Always 170 (0xaa hex)
2. Byte: Command (4 or 5)
3. Byte: Parameter (0 - 128)
4. Byte: Value (0=off, 1=on)
The USM-RC-2 send an answer block with 128 Bytes back. The first byte is always the command number you've sent. You can ignore all other bytes.
First, you have to send once the command 4 with the parameter 1: 170 4 1 0. This disables the normal function trigger (via prop., nautic, EKMFA, inputs), because both (normal and RS232) are not possible at the same time.
At command 5, the parameter is the function number you want to switch, shown in this list (only in German at the moment):
Code: Alles auswählen
1 Zusatzsound 1
2 Zusatzsound 2
3 Zusatzsound 3
4 Zusatzsound 4
5 Zusatzsound 5
6 Zusatzsound 6
7 Zusatzsound 7
8 Zusatzsound 8
9 Zusatzsound 9
10 Zusatzsound 10
11 Zusatzsound 11
12 Zusatzsound 12
13 Zusatzsound 13
14 Zusatzsound 14
15 Zusatzsound 15
16 Zusatzsound 16
17 Zusatzsound 17
18 Zusatzsound 18
19 Zusatzsound 19
20 Zusatzsound 20
21 Zusatzsound 21
22 Zusatzsound 22
23 Zusatzsound 23
24 Zusatzsound 24
25 Zusatzsound 25
26 Zusatzsound 26
27 Zusatzsound 27
28 Zusatzsound 28
29 Zusatzsound 29
30 Zusatzsound 30
31 Ausgang 1
32 Ausgang 2
33 Ausgang 3
34 Ausgang 4
35 Ausgang 5
36 Ausgang 6
37 Ausgang 7
38 Ausgang 8
39 Ausgang 9
40 Ausgang 10
41 Ausgang 11
42 Ausgang 12
43 Ausgangs-Sequenz 1
44 Ausgangs-Sequenz 2
45 Lichtschalter +
46 Lichtschalter -
47 Standlicht
48 Abblendlicht
49 Fernlicht
50 Lichthupe
51 Nebelscheinwerfer
52 Nebelschlusslicht
53 Blinker links
54 Blinker rechts
55 Warnblinker
56 Lok: Fahrtlicht
57 Schiff: Vor Anker
58 Schiff: Auf Grund
59 Schiff: In Fahrt
60 Schiff: Manövrierbehindert
61 Schiff: Manövrierunfähig
62 Schiff: Tiefgangbehindert
63 Schiff: Schleppend
64 Schiff: Assistierend
65 Schiff: Fischend
66 Fahrsound ein/aus
67 Fahrsound 2 ein/aus
68 Zufallsound ein/aus
69 Lautstärke +
70 Lautstärke -
71 Gasspiel
72 Fahrsound Drehzahländerung
73 Software-Reset
74 WAV-Player: Play/Stop
75 WAV-Player: Pause
76 WAV-Player: Titel vor
77 WAV-Player: Titel zurück
78 WAV-Player: Random
79 Servo 1 in Position 1
80 Servo 1 in Position 2
81 Servo 1 in Position 3
82 Servo 1 in Position 4
83 Servo 2 in Position 1
84 Servo 2 in Position 2
85 Servo 2 in Position 3
86 Servo 2 in Position 4
87 Servo 1 Sequenz
88 Servo 2 Sequenz
89 SM-IR-16-2: Servo 1 in Position 1
90 SM-IR-16-2: Servo 1 in Position 2
91 SM-IR-16-2: Servo 2 in Position 1
92 SM-IR-16-2: Servo 2 in Position 2
93 SM-IR-16-2: Rundumlicht
94 SM-IR-16-2: Blitzer
95 SM-IR-16-2: Lauflicht
96 Ausgang 13 (EXM-2)
97 Ausgang 14 (EXM-2)
98 Ausgang 15 (EXM-2)
99 Ausgang 16 (EXM-2)
100 Ausgang 17 (EXM-2)
101 Ausgang 18 (EXM-2)
102 Ausgang 19 (EXM-2)
103 Ausgang 20 (EXM-2)
104 Ausgang 21 (EXM-2)
105 Ausgang 22 (EXM-2)
106 Ausgangs-Sequenz 3
107 Ausgangs-Sequenz 4
108 Ausgangs-Sequenz 5
109 Ausgangs-Sequenz 6
110 Ausgangs-Sequenz 7
111 Ausgangs-Sequenz 8
112 Servo 3 in Position 1 (EXM-2)
113 Servo 3 in Position 2 (EXM-2)
114 Servo 3 in Position 3 (EXM-2)
115 Servo 3 in Position 4 (EXM-2)
116 Servo 4 in Position 1 (EXM-2)
117 Servo 4 in Position 2 (EXM-2)
118 Servo 4 in Position 3 (EXM-2)
119 Servo 4 in Position 4 (EXM-2)
120 Motorausgang EXM-2 links
121 Motorausgang EXM-2 rechts
122 Rückwärtsfahrt
123 Bremsen
124 Multifunktion 1
125 Multifunktion 2
126 Multifunktion 3
127 Multifunktion 4
128 Rückfahrsound deaktivieren If you want to switch on output 2 you have to send: 170 5 32 1. All functions are memory functions. The output 5 stays on, until you send a 170 5 32 0 to the USM-RC-2.
Restrictions in V1.30d:
- The USM-RC-2 can receive and handle only one command every 10 ms.
- After receiving a command 5 there is an artificial delay of 5 ms (flashing the blue LED) which may cause an interruption in sound output.
Re: Digital or Serial switching to trigger events
Andy,
Thank you - this looks great - I'll see if I can get it to work my end in the next few days
THANK YOU
Jonathan
Thank you - this looks great - I'll see if I can get it to work my end in the next few days
THANK YOU
Jonathan