New here and don't speak German . I will order RC2 module in few to equip an US Tamiya's truck.
I should need US mode for turn/Parking lights for back of the truck and trailer leds but I need also the "European mode" for orange leds in front of truck that remains off when parking lights are on.
I saw that US mode has to be validated on right side of the output menu of soft, I suppose it should be for all turning lights.
Does software allows mix on turning lights output please? I mean 2US mode AND 2 EU mode on left side choice of the menu?
Yes, you can mix it as you like it.
The only drawback is that you will have to use 2 outputs to the indicators in front as normal and 2 other outputs as combined rear/indicators at the rear end.
You can also choose to have the US-style rear, where you have indicator, parkinglight and brake light on the same output.
Combine that with US-style indicators on the front fenders where you have parkinglight and indicators on the same output or with only indicators, thats all up to you.
Feel free to answer in german, I can read it but not write it.
Phil13 hat geschrieben:Ah? Ok, didn't know that, I will try it, maybe module plays with led intensity, it will save as least 2 outputs!
You guess correctly, it uses different intensity. Note that the intensity levels for the "Combined American Tail-Lights left/right" don't sum up to 100% max, which is different to using the normal "Combined Tail-Lights".
So you can set values like e.g. 10% Parking Light, 100% Brake and 50% Indicator for the American lights.