Activation delay timings.

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Activation delay timings.

Beitrag von astecme »

Hi,

I noticed on the settings that in positions A and D you have preset the static at 50 the short at 50 and the long at 2000 and that in positions B and C you have static at 500 the short at 500 and the long at 2000.

This seems wrong should the static be 50 in both and the short 500?

Also for the static setting if you have the TX stick in that area for between the static time and the short time - is that the static activation? then short would be 500 to 2000 and long 2000+ ?

Thanks
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Activation delay timings.

Beitrag von BEIER-Electronic Andy »

We think it is ok ;)

The preset values in V1.12 are the same values as the fixed values in the older firmwares.

You should not use the static and the memory (short/long) functions on the same channel! Because this makes mostly no sense. I think you want to have 3 memory functions (short, middle and long delay) at each position? But this is not possible with 1 static and 2 memory functions.

A static function activates (after the activation delay) the function as long the stick is in this postion.
A memory function toggles (after the activation delay) the function when the stick reaches the position.

When you move the stick from position N to position A, you crosses the area B. Because of this you need an activation delay (500ms) for area B.
Antworten