Cannot active the same sound twice.

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

Cannot active the same sound twice.

Beitrag von Sune Nielsen »

Hi there..
I have just installed the USM-RC2 in
I use an MC-12 with the Mergen multi switch.
I have Jeti EX 2.4 ghz.
I made it all work :)

One small problem though.
If I activate a sound. I cannot activevate the same sound before I have activated another sound first.
Example. If I start the engine sound. I cannot stop the engine sound before I have used another sound...


Best regards...
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Cannot active the same sound twice.

Beitrag von BEIER-Electronic Andy »

Hello Sune,

flashes the blue LED on the USM-RC-2 periodically? Also when you trigger a function with a switch?

Can you upload your project file (*.usm). And maybe a recorded diagnosis file (diagnose.dat) from this problem?
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

Re: Cannot active the same sound twice.

Beitrag von Sune Nielsen »

It only flashes when I use one of the switches on the transmitter...
I will get back to you, with a setup file and the diagnosis
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Cannot active the same sound twice.

Beitrag von BEIER-Electronic Andy »

Please try to invert (reverse) the multiswitch channel in the mc-12 or with the Jeti-Box.
Sune Nielsen
Beiträge: 10
Registriert: So 6. Mär 2011, 11:25

Re: Cannot active the same sound twice.

Beitrag von Sune Nielsen »

Thank you for clearing that up :)
The channel was reversed. Must have been mistake.

Everything works like a charm now.

Most awesome sound module.
Antworten