Single flash on lights
Single flash on lights
Would it be possible to have a single flash as an option on the light settings in addition to the percentage - and maybe a repeat flash? This would enable you to, for example "flash" your headlights . It is possible using a sequence but that seems not a great use of a sequence.
Thanks
Allan
Thanks
Allan
- marco polo
- Beiträge: 92
- Registriert: Di 26. Okt 2010, 20:45
- Wohnort: holland
- Kontaktdaten:
Re: Single flash on lights
hi allan
if you use highbeam without memory setting on nautic
or highbeam on proportional channel in position static
it is posible to flash the combined head lights and or the high beam headlights
as long as you opererate the function highbeam
or several times short
if you use highbeam without memory setting on nautic
or highbeam on proportional channel in position static
it is posible to flash the combined head lights and or the high beam headlights
as long as you opererate the function highbeam
or several times short
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Niets is zeker, en zelfs dat niet.
Re: Single flash on lights
Marco. thanks I will try that. This gear is amazing!
Re: Single flash on lights
Marco, thanks for the suggestion but that does not seem to do what I had intended.
regards
Allan
regards
Allan
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Single flash on lights
Sorry, but I think we can't do this. It's a very special feature and very difficult to integrate in the Sound-Teacher. I think you have to use a sequence...astecme hat geschrieben:Would it be possible to have a single flash as an option on the light settings in addition to the percentage - and maybe a repeat flash? This would enable you to, for example "flash" your headlights . It is possible using a sequence but that seems not a great use of a sequence.
Re: Single flash on lights
Thanks, that is the conclusion I came to. ...... More sequences then pleaseBEIER-Electronic hat geschrieben:Sorry, but I think we can't do this. It's a very special feature and very difficult to integrate in the Sound-Teacher. I think you have to use a sequence...astecme hat geschrieben:Would it be possible to have a single flash as an option on the light settings in addition to the percentage - and maybe a repeat flash? This would enable you to, for example "flash" your headlights . It is possible using a sequence but that seems not a great use of a sequence.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Single flash on lights
Difficult... Because then we must change the general concept of the sequences. In the current way there is no more memory (RAM) for other sequences in the processor.
however, on the sd card is lots of space... we will see....
however, on the sd card is lots of space... we will see....
Re: Single flash on lights
Many thanks - yes the SD card has a huge amount of memory!