Spektrum DX

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Spektrum DX

Beitrag von astecme »

Hi I would like to use the USMRC2 with my spektrum. It works but it is not so easy to get the middle (half stick) functions and with steering that leaves only 2 spare fully digital channels BUT a number of switches. What I would like to do is set the switches so that I can use the Dual rates to select which option will be used ( half or full stick) then it becomes simple to select the necessary rate and the channel to be activated. Can you tell me at what point the Full channel and half channels are recognised by the BEIER system, and what size is the window? e.g. 0-10%, 20-30%, 70-80% 90-100%. Also on e.g. the DX8 upwards there is a flight mode switch which could be used to increase the number of "positions" available is there an opportunity there? This sort of selection is available on a number of manufactureres devices.

Many Thanks
Benutzeravatar
Oldchap
Beiträge: 1146
Registriert: Do 10. Mär 2011, 14:13
Wohnort: Raum Fürth / Bayern

Re: Spektrum DX

Beitrag von Oldchap »

Hello,

a simple answer from me to the ranges A to D: you can easily adjust the width of each range A to D in your soundteacher (part "configuration prop-channels").
Gruß

Gerhard
_________________
Panzermodelle 1:6
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: Spektrum DX

Beitrag von BEIER-Electronic Andy »

Yes, just drag and drop the blue squares:
beispiel_propschwellen.gif
beispiel_propschwellen.gif (3.32 KiB) 3029 mal betrachtet
astecme
Beiträge: 91
Registriert: Di 24. Sep 2013, 18:38

Re: Spektrum DX

Beitrag von astecme »

Many Thanks
Antworten