alarm sound and blinkers in output sequence

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

alarm sound and blinkers in output sequence

Beitrag von darentz27 »

is it possible in sound-teacher 1.11b to put the blinkers and chirp sound in a sequence like a real alarm on a truck?
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: alarm sound and blinkers in output sequence

Beitrag von BEIER-Electronic Andy »

Yes. Just activate the blinker outputs in the sequence and configure the sequence you want. Then activate the output sequence at the chirp sound.
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: alarm sound and blinkers in output sequence

Beitrag von darentz27 »

Can someone help me to configure soundteacher?my blinkers are connected to output 2&4.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: alarm sound and blinkers in output sequence

Beitrag von BEIER-Electronic Andy »

Of course...
beispiel_ausgangssequenz_chirp.gif
beispiel_ausgangssequenz_chirp.gif (42.72 KiB) 5031 mal betrachtet
darentz27
Beiträge: 33
Registriert: Mi 26. Dez 2012, 11:33

Re: alarm sound and blinkers in output sequence

Beitrag von darentz27 »

and by the proportional channel i select output sequence 1?
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: alarm sound and blinkers in output sequence

Beitrag von BEIER-Electronic Andy »

No, select the additional sound (chirp.wav). Additional sound 3 in the example.

The sound activates then the output sequence.
Antworten