Good day!
I've decided I want to change a couple settings in my trucks to use different switches on my radio to operate "change of direction" and "sound on-off".
However, seems that I made some errors in saving new files in Sound Teacher and have a couple trucks/SFR1s that aren't as they should be.
If I look at Sound Teacher, under "Data Cable", and there's an option for "Upload project via data cable". I thought this enabled me to upload an existing program from an SD Card to sound Teacher. The SFR1 1.41pdf says that this feature is for "transfer of project data to SD card by data cable". Seems to be the opposite.
Glad for thoughts on my ability to upload an existing SFR1 truck's data to be saved or edited in Sound Teacher. I'd hate to have to just about start over.
If indeed I can pull the data from the SD Card...I assume after an upload to ST that I'd just save it?
Upload SFR1 Data/Programming to Sound Teacher from SD Card?
Re: Upload SFR1 Data/Programming to Sound Teacher from SD Card?
Hello Matt,
"Upload project via data cable" is actually a download (PC to SFR-1), i.e. it's just the same as clicking the "Transfer project data" button at the bottom right.
See the following FAQ entry for getting the project from the SD card:
viewtopic.php?t=3722
"Upload project via data cable" is actually a download (PC to SFR-1), i.e. it's just the same as clicking the "Transfer project data" button at the bottom right.
See the following FAQ entry for getting the project from the SD card:
viewtopic.php?t=3722
Re: Upload SFR1 Data/Programming to Sound Teacher from SD Card?
Thank you Rascal!