Anfahrgerausch functioniert nicht.

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
Riny
Beiträge: 7
Registriert: Do 1. Apr 2021, 19:41

Anfahrgerausch functioniert nicht.

Beitrag von Riny »

Hello all,

I have a USM-RC2 soundmodule and everything works fine except the motorsound will not rev up when driving.
The motor control unit (Sabertooth 2x32) works as should be so there could not be the problem.
I use a Frsky Transmitter/receiver.
Connections are as the schematics by Beier. (so from receiver to 1 and from 1 to the motor control and same for 2nd channel.)
The motorcontrol is not used for powering the receiver.
The sounds are from Beier and also used in other models and there it works fine.

If any have a solution or maybe an idea, please let me know since i have tried everything what came up in my mind and i am out of ideas.

Thx in advance,

Riny
dark-angel712
Beiträge: 88
Registriert: Fr 21. Jan 2022, 09:27

Re: Anfahrgerausch functioniert nicht.

Beitrag von dark-angel712 »

Hello Riny

Have you activated “quick switching” in the settings?
Riny
Beiträge: 7
Registriert: Do 1. Apr 2021, 19:41

Re: Anfahrgerausch functioniert nicht.

Beitrag von Riny »

Yes, i have tried all possibilities
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Anfahrgerausch functioniert nicht.

Beitrag von Rascal »

Hello Riny,

please upload the project file (*.usm) for us to check.
Riny
Beiträge: 7
Registriert: Do 1. Apr 2021, 19:41

Re: Anfahrgerausch functioniert nicht.

Beitrag von Riny »

Hello Rascal,

Here is the USM file[attachment=0]Tiger1.usm
Dateianhänge
Tiger1.usm
(39.28 KiB) 222-mal heruntergeladen
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Anfahrgerausch functioniert nicht.

Beitrag von Rascal »

Hello,

you assigned a SBUS/SUMD channel to Prop #1 and #2. Go to Configuration > S-Bus/SUMD and remove the entries under Prop #1 and #2 so it shows "-" instead. The throttle signal will then be received via X2/1 and X2/2.
Riny
Beiträge: 7
Registriert: Do 1. Apr 2021, 19:41

Re: Anfahrgerausch functioniert nicht.

Beitrag von Riny »

Hi Rascal, thx for the answer.
Im goin to check/change this setting.
I let u know the result 👍👍
Riny
Beiträge: 7
Registriert: Do 1. Apr 2021, 19:41

Re: Anfahrgerausch functioniert nicht.

Beitrag von Riny »

Hello Rascal,

thx fir the help, it works now :D

Riny
Antworten