Brushless ESC and motor on LM_BT Servo sonnection

Lichtmodule für Auflieger und Anhänger
Antworten
RayC
Beiträge: 23
Registriert: Fr 10. Feb 2023, 17:19
Wohnort: Ireland

Brushless ESC and motor on LM_BT Servo sonnection

Beitrag von RayC »

Hi
I want to use a LM-BT-16-4 on a trailer which has a Brushless ESC and motor driving an hydraulic pump. Can a brushless ESC be connected to a servo connection on a Bluetooth Light Module (and would it work :D)? I am trying to be sure it will work before I order all the parts?

Thanks

Ray
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Brushless ESC and motor on LM_BT Servo sonnection

Beitrag von Rascal »

Hello Ray,

yes that will work. Anything that can connect to a receiver can also be connected to the servo output as long as the current draw does not exceed 1A permanently. An ESC does not require that much of current typically (for the control circuit) and there is no difference to the light module if the ESC drives a brushed or brushless motor.

However note that a BEC in the ESC must be disabled by pulling the red wire from the servo plug and insulating it.
If the ESC does not have a BEC then the red wire must stay in the plug.
RayC
Beiträge: 23
Registriert: Fr 10. Feb 2023, 17:19
Wohnort: Ireland

Re: Brushless ESC and motor on LM_BT Servo sonnection

Beitrag von RayC »

Thanks Rascal
I was hoping it wouldn't work so that I could have a technical excuse not to buy the trailer. (I hope my double negatives are not lost in translation.
I guess I'll have to get them now

Ray
Antworten