Ich habe festgestellt, dass die Glühlampen-Simulation bereits in der Einstellung "LEICHT" mir schon recht langsam vorkommt. Leider kann ich die aber nicht schneller einstellen. Hier würde ich mir anstatt der vordefinierten Werte lieber einen Prozentwert wünschen. Dann kann jeder das so einstellen, wie es ihm gefällt.
Vielen Dank.
USM RC-3
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: USM RC-3
Hallo dzahnow,
vielen Dank für den Vorschlag. Ich werde mir das genauer anschauen, wenn ich mal etwas mehr Zeit habe...
vielen Dank für den Vorschlag. Ich werde mir das genauer anschauen, wenn ich mal etwas mehr Zeit habe...
-
david.harrison
- Beiträge: 8
- Registriert: Fr 1. Dez 2023, 19:16
USM RC-3 - Suggest Engine Startup change be made immediate
Currently, the engine startup sound must be played to its end before any throttle movement can be made to change to idle or any FG sounds. This is OK for short startup sounds of a few seconds such as those for land vehicles, for which the USM-RC-3 was primarily designed. However, I am developing many projects for helicopters and airplanes. Those types of startup sounds, especially for jet turbines, typically have every long turbine spool-up times before they reach idle speed and can transition to the idle loop. These spool-up sounds are always real recordings from the real aircraft so they can be up to 2 minutes long. During that time, the RC operator is locked out of changing the engine sound. He/she may get fed up with waiting for the whole of that time and may want to move the throttle stick to at least reach idle speed, if not increase the throttle to lift off.
Can you please make a firmware change to allow the engine startup to change immediately the throttle stick is moved? This should be the default action and needn't be a user-settable option as it would work for all startup sounds, long or short.
I am currently converting my entire collection of 41 ShockWave 3 helicopter sounds and my 110 airplane sounds to the BEIER format and would like to see that change made.
Thank you.
Can you please make a firmware change to allow the engine startup to change immediately the throttle stick is moved? This should be the default action and needn't be a user-settable option as it would work for all startup sounds, long or short.
I am currently converting my entire collection of 41 ShockWave 3 helicopter sounds and my 110 airplane sounds to the BEIER format and would like to see that change made.
Thank you.
Zuletzt geändert von david.harrison am Do 25. Jan 2024, 21:29, insgesamt 1-mal geändert.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: USM RC-3
Hello David,
thank you very much for the suggestion. Of course I understand the problem when there is a long starting sound.
It shouldn't be a problem to build this into the firmware. I would still have to think about whether with or without a selectable option.
But I can't say yet when we'll get around to changing the firmware.
thank you very much for the suggestion. Of course I understand the problem when there is a long starting sound.
It shouldn't be a problem to build this into the firmware. I would still have to think about whether with or without a selectable option.
But I can't say yet when we'll get around to changing the firmware.
-
david.harrison
- Beiträge: 8
- Registriert: Fr 1. Dez 2023, 19:16
Re: USM RC-3
Hello Andy. Do you have any update as to when you might be able to release a new firmware build with this issue fixed? - I.e. cannot change sound during a long engine startup.
Thank you.
Thank you.
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: USM RC-3
Due to the personnel situation in the company, I cannot currently say when I will have time for software updates. Several colleagues here have been out for a long time and it looks like they will continue to be out for a long time.
I know you'd like to hear something different, but I really can't predict when I'll have time to make software changes at the moment.
I know you'd like to hear something different, but I really can't predict when I'll have time to make software changes at the moment.