The loudspeakers you currently offer are unsuitable for flying models which are operated much farther away from the RC operator than are land vehicles and model boats.
The small speakers you offer are satisfactory for land vehicles and most model boats. Your largest speakers can handle 25 Watts but have a very low sensitivity at 84db/1W/1m and are quite heavy. For model aeroplanes and model helicopters, you must have as high a SPL (Sound Pressure Level) as possible at the source in order to adequately hear them several tens of meters away.
I would like to suggest you stock the Visaton R10 S 4 Ohm loudspeakers. These have a very high sensitivity of 90 dB/1W/1m and are very lightweight, a most important consideration for flying models.
I would also like to suggest you carry small, lightweight exciters that are very effective for EPO foam flying models., and do not require the modeller to cut holes in their beautiful scale airplane or helicopter. The model I have been using is Dayton Audio EX25VT2-4 IMS.
Loudspeakers
- BEIER-Electronic Andy
- Administrator
- Beiträge: 4557
- Registriert: Mi 17. Dez 2008, 07:37
Re: Loudspeakers
Thank you very much for the suggestion. We will test the loudspeaker and also an exciter.
-
david.harrison
- Beiträge: 8
- Registriert: Fr 1. Dez 2023, 19:16
Re: Loudspeakers
OK, thank you very much. I found the Visaton R10S loudspeakers to be very inexpensive, but Visaton Exciters are VERY expensive, so steer clear of them for model applications. The Dayton Audio exciters are also quite inexpensive.