2nd nautic module / switch beta version v1.10

Soundmodul für Fahrgeräusche (speziell für RC-Modelle). Der Nachfolger des USM-RC
Antworten
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

2nd nautic module / switch beta version v1.10

Beitrag von marco polo »

dear beier team

first of all
thanks for all the new functions with this new beta version
it will keep use busy to discover it all
it is getting greater every time you give use a new software release
keep on going the way you are doing

when i was programming the 2nd nautic module / switch
i discoverd that switch 8 was not working the way it sould be
when i activated the switch upwards it has the same function as
switch 1 upwards on the first nautic module / switch :?
when i activated the switch downwards nothing happend :shock:
i think it is a litle bug that you can fixes by reprogaming the protocol for switch 8 :mrgreen:

used components
transmitter robbe fc-16 40 mhz old version
multiswitch 1 robbe 8413
multiswitch 2 robbe 1511 first attempt
multiswitch 2 robbe 8413 second attempt
all sound slots full with sounds

greetings from the netherlands

marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: 2nd nautic module / switch beta version v1.10

Beitrag von BEIER-Electronic Andy »

Hello marco polo,

I've uploaded just a new update with a little bugfix. The version number is still V1.10a. Please download the update and test, if the switch 8 works now correctly (I can't test it, because I have no Robbe Multiswitch here at the moment).
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: 2nd nautic module / switch beta version v1.10

Beitrag von marco polo »

hi beier team

i am sorry to say but the update is not ok yet

switch 8 down has stil no function
switch 2 down function dissapered

but the most strange thing happend to switch 8 up
the first time i saved the new config to the memorycard

there was no red light flickering during startup ( like when theres an update)
just the green one was steady on
and the blue one was blicking first a few times then a pause and then the normal blicking ( when it recieves the transmitter signal)

switch 8 up played sound slot 8 on the 2nd nautic
and switch 1 up on the first nautic played also sound slot 8 and switch one up on nautic 1 is assinged to engine on / off

the second time i saved the the config (because i thought i went wrong) to the memorycard
switch 8 up on the 2nd nautic has the same funtion as switch 1 up on the first nautic (engine on/off)

then i tought the down load of the update has a fault wile down loading
so i did the download again several times
but ervery time with the same results

i hope i made it all clear to you
i hope you can do something with these results

thanks for youre patiance with us

gr marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: 2nd nautic module / switch beta version v1.10

Beitrag von BEIER-Electronic Andy »

The last version was only a little bugfix in the Sound-Teacher and no firmware update. So it's ok, if the red LED hasn't flashed.

I've tested it here again with two Nautic moduls in a Graupner mc19, and all switches on both modules are ok. And I can't find any other bug in the software...

Can you please send me your project file?
Benutzeravatar
marco polo
Beiträge: 92
Registriert: Di 26. Okt 2010, 20:45
Wohnort: holland
Kontaktdaten:

Re: 2nd nautic module / switch beta version v1.10

Beitrag von marco polo »

problem solved !! :D

thanks beier team for the support it is great
the problem was not a software error
but a hardware error
caused by the micro usb card reader
at last i used the micro card reader for the sd card slot
and now it is working the way i should be
all functions are working

hollyday greetings from holland

marco polo
groeten uit Nederland,
Niets is zeker, en zelfs dat niet.
Benutzeravatar
BEIER-Electronic Andy
Administrator
Beiträge: 4557
Registriert: Mi 17. Dez 2008, 07:37

Re: 2nd nautic module / switch beta version v1.10

Beitrag von BEIER-Electronic Andy »

Thanks for this information :)
Antworten