Hi Rascal
Could you let me know how the LM-SW optional switch is wired please? I am referring to the switch that allows the motor to operate manually.
I am adapting my Tamiya Motorised legs to work with the bluetooth module and I already have a switch fitted to my trailer
Thanks
Ray
Aufliegerstützen
Re: Aufliegerstützen
Hello Ray,
you will need a SPDT (single pole dual throw) switch with middle position, so the Tam switch will work just fine.
Take a servo cable and connect the red wire to the center pin of the switch, orange (or white) and brown (or black) to the outer pins. See also the picture under "Optional light module supplies".
you will need a SPDT (single pole dual throw) switch with middle position, so the Tam switch will work just fine.
Take a servo cable and connect the red wire to the center pin of the switch, orange (or white) and brown (or black) to the outer pins. See also the picture under "Optional light module supplies".
Re: Aufliegerstützen
Thanks
I looked for a drawing or text but never thought to zoom in on the photo. I do hate being a silly customer
. 
I looked for a drawing or text but never thought to zoom in on the photo. I do hate being a silly customer