Servonaut e22 reverse, brake lights to sm-ir-16-2

Lichtmodule für Auflieger und Anhänger
Antworten
Eivinboy
Beiträge: 8
Registriert: So 22. Mai 2022, 01:40

Servonaut e22 reverse, brake lights to sm-ir-16-2

Beitrag von Eivinboy »

So in my truck i got a mix og servonaut and beier meaning i got a servonaut e22 speedcontroller that has the reverse and brake lights connected to it and then a beier usm rc 2 that does the rest so im wondering if theres a way to connect them so i can use the reverse and brake lights on my trailer. Ive ran out of all outputs on my truck.
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Servonaut e22 reverse, brake lights to sm-ir-16-2

Beitrag von Rascal »

Hello,

if you are using servos connected to USM-RC-2 you can't use outputs 11 and 12 but they still can be connected on the SM-IR-16-2. Thus, if those are still available, connect the brake and reverse light output from the E22 to any free input (X1/4 to X1/7) each and define those inputs as shown:
  • brake light: "Brake light"
  • reverse light: "Driving backwards"
Then configure output 11 as "Brake light" and ouput 12 as "Reversing light".

Else there is no option except changing to the USM-RC-3 with LM-IR-16-4, then you have 16 independent outputs that can be used.
Eivinboy
Beiträge: 8
Registriert: So 22. Mai 2022, 01:40

Re: Servonaut e22 reverse, brake lights to sm-ir-16-2

Beitrag von Eivinboy »

Rascal hat geschrieben: ↑So 29. Mai 2022, 13:29 Hello,

if you are using servos connected to USM-RC-2 you can't use outputs 11 and 12 but they still can be connected on the SM-IR-16-2. Thus, if those are still available, connect the brake and reverse light output from the E22 to any free input (X1/4 to X1/7) each and define those inputs as shown:
  • brake light: "Brake light"
  • reverse light: "Driving backwards"
Then configure output 11 as "Brake light" and ouput 12 as "Reversing light".

Else there is no option except changing to the USM-RC-3 with LM-IR-16-4, then you have 16 independent outputs that can be used.
Hey Rascal If i were to switch to the ufr 1230 speedcontroller could i connect it to my sm ir 16-2 and have the brake lights, reverse lights, etc connected there?

Like have brake lights on output 1 of the ufr 1230 then connect my trailers brake lights to output 1 on my sm-ir-16-2?
Rascal
Beiträge: 4113
Registriert: Do 9. Okt 2014, 01:31

Re: Servonaut e22 reverse, brake lights to sm-ir-16-2

Beitrag von Rascal »

Hello,

yes, you can do that. But you cannot transmit the outputs of UFR and USM to the trailer, only the outputs of one of the two. Therefore this combination requires a bit of planning.

If you use the UFR you can only transmit 8 outputs via IR automatically, but it is also possible to switch on/off output 9-12 through the transmitter via the control channel manually.

If you want to keep the IR connection with the sound module configure all front lights to the UFR and all lights that are needed in the truck & trailer or only in the trailer to the USM.

Note:
Configure the "Digital communication with sound module" to transfer speed information as well as the status of lights to the USM automatically. The communication is however unidirectional, so if you switch on e.g. the "parking lights" at the USM then the parking lights (if there is an output defined as such) of the UFR won't switch on, too.
But if you switch on the "parking lights" at the UFR then the parking lights (if there is an output defined as such) of the USM will switch on, too.

Alternatively consider the SFR-1, it combines the functions of UFR & USM and also simplifies the wiring. :)
Antworten