Hi,
Ive managed to setup my RC-2 so i can work my LEDS from it remotely using the prop channel 4.
Im using 12v LED's (with resistors for each one). I have 6 LED's in total that will be on constantly (Tug Boat) will these be all ok running from the one output?
LED's (Max Amount)
Re: LED's (Max Amount)
Hello,
in short, yes.
The maximum current one output can handle is 1,5A but the sum of all outputs must not exceed 3,0A.
If this are standard LEDs they will draw around 20mA (0,02A) each, so 6x20mA=120mA, which is well within those limits.
in short, yes.
The maximum current one output can handle is 1,5A but the sum of all outputs must not exceed 3,0A.
If this are standard LEDs they will draw around 20mA (0,02A) each, so 6x20mA=120mA, which is well within those limits.
Re: LED's (Max Amount)
brilliant thankyou 